etsysPolicyProfilePriority
ENTERASYS-POLICY-PROFILE-MIB ·
.1.3.6.1.4.1.5624.1.2.6.1.5.1.7
Object
column
r/w
Integer32
This object defines the default ingress Class of Service
of this profile.
If a port has an active policy and the policy's
etsysPolicyProfilePriorityStatus is set to enabled(1), the
etsysPolicyProfilePriority will be applied to all packets
arriving on the port that do not match any of the policy
classification rules.
Note that dot1dPortDefaultUserPriority will still exist
from a management view but will NEVER be applied to traffic
arriving on a port that has an active policy and enabled
etsysPolicyProfilePriority defined, since policy is applied
to traffic arriving on the port prior to the assignment of
a priority using dot1dPortDefaultUserPriority.
The behavior of an enabled etsysPolicyProfilePriority on
any associated port SHALL be identical to the behavior of
the dot1dPortDefaultUserPriority upon that port.
Context
- MIB
- ENTERASYS-POLICY-PROFILE-MIB
- OID
.1.3.6.1.4.1.5624.1.2.6.1.5.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- etsysPolicyProfileEntry
- Table
- etsysPolicyProfileTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-4095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysPolicyProfileIndex A unique arbitrary identifier for this Policy.
Since a policy will be applied to a user regardless of his
or her location in the network fabric policy names SHOULD… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.1.5.1.1 |
| etsysPolicyProfileUntaggedVlans The set of VLANs which should transmit egress packets as
untagged on ports for which this policy is active. This
object is superseded on a per-port per-VLAN basis by any
'set' bi… | column | VlanList | .1.3.6.1.4.1.5624.1.2.6.1.5.1.10 |
| etsysPolicyProfileOverwriteTCI If set, the information contained within the TCI field of
inbound, tagged packets will not be used by the device after
the ingress classification stage of packet relay. The net … | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.1.5.1.11 |
| etsysPolicyProfileRulePrecedence Each octet will contain a single value representing the rule
type to be matched against, defined by the
PolicyClassificationRuleType textual convention. When read,
will return… | column | OctetString | .1.3.6.1.4.1.5624.1.2.6.1.5.1.12 |
| etsysPolicyProfileVlanRFC3580Mappings The set of VLANs which are currently being mapped onto this
policy profile by the etsysPolicyRFC3580MapTable. This only
refers to the mapping of vlan-tunnel-attributes returned… | column | VlanList | .1.3.6.1.4.1.5624.1.2.6.1.5.1.13 |
| etsysPolicyProfileMirrorIndex A reference to a packet mirror destination (defined elsewhere).
A value of (-1) indicates no mirror is specified, but a mirror is
not explicitly prohibited.
… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.1.5.1.14 |
| etsysPolicyProfileAuditSyslogEnable Enables the sending of a syslog message if no rule bound to this
profile has prohibited it. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.1.5.1.15 |
| etsysPolicyProfileAuditTrapEnable Enables the sending of a SNMP NOTIFICATION if no rule bound to this
profile has prohibited it. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.1.5.1.16 |
| etsysPolicyProfileDisablePort Will set the ifOperStatus of the port, on which the frame
which used this profile was received, to disable, if
if no rule bound to this profile has prohibited it. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.1.5.1.17 |
| etsysPolicyProfileUsageList When read, a set bit indicates that this profile was used to
send a syslog or trap message for corresponding port. When set,
the native PortList will be bit-wise AND'ed with the… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.5624.1.2.6.1.5.1.18 |
| etsysPolicyProfileFstIndex A reference to a Flow Setup Throttling (FST) class as defined by
the etsysFlowLimitingClassType object.
A value of (0) indicates no FST class is specified. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.1.5.1.19 |
| etsysPolicyProfileName Administratively assigned textual description of this
Policy.
This object MUST NOT be modifiable while this entry's
RowStatus is active(1). | column | OctetString | .1.3.6.1.4.1.5624.1.2.6.1.5.1.2 |
| etsysPolicyProfileHttpRedirectIndex A reference to a HTTP Redirect server group as specified by
the etsysPolicyHttpRedirectGroupIndex object.
A value of (0) indicates no HTTP Redirect group is specifi… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.1.5.1.20 |
| etsysPolicyProfilePortAuthOverride If a port has an active policy and that policy's
etsysPolicyProfilePortAuthOverride is set to enabled(1),
all frames arriving on the port will have that policy applied.
In additio… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.1.5.1.21 |
| etsysPolicyProfileNSI This object defines the NSI (Network Service Identifier)
of this profile.
If a port has an active policy and the policy's
etsysPolicyProfileNSI is set, the NSI is associated
wi… | column | Unsigned32 | .1.3.6.1.4.1.5624.1.2.6.1.5.1.22 |
| etsysPolicyProfileACL Administratively assigned textual description of the
ACL rule list to apply. | column | OctetString | .1.3.6.1.4.1.5624.1.2.6.1.5.1.23 |
| etsysPolicyProfileRowStatus This object allows for the dynamic creation and deletion
of entries within the etsysPolicyProfileTable as well as
the activation and deactivation of these entries.
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.5624.1.2.6.1.5.1.3 |
| etsysPolicyProfilePortVidStatus This object defines whether a PVID override should
be applied to ports which have this profile active.
enabled(1) means that any port with this policy active
will… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.1.5.1.4 |
| etsysPolicyProfilePortVid This object defines the PVID of this profile.
If a port has an active policy and the policy's
etsysPolicyProfilePortVidStatus is set to enabled(1), the
etsysPolic… | column | Unsigned32 | .1.3.6.1.4.1.5624.1.2.6.1.5.1.5 |
| etsysPolicyProfilePriorityStatus This object defines whether a Class of Service
should be applied to ports which have this profile
active.
enabled(1) means that any port with this policy active
w… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.1.5.1.6 |
| etsysPolicyProfileEgressVlans The set of VLANs which are assigned by this policy to
egress on ports for which this policy is active. Changes
to a bit in this object affect the per-port per-VLAN
Registrar contr… | column | VlanList | .1.3.6.1.4.1.5624.1.2.6.1.5.1.8 |
| etsysPolicyProfileForbiddenVlans The set of VLANs which are prohibited by this policy to
egress on ports for which this policy is active. Changes
to this object that cause a port to be included or
excluded affec… | column | VlanList | .1.3.6.1.4.1.5624.1.2.6.1.5.1.9 |