etsysPolicyNonVolatileRuleResult1
ENTERASYS-POLICY-PROFILE-MIB ·
.1.3.6.1.4.1.5624.1.2.6.11.20.1.10
Object
column
Integer32
If the etsysPolicyRuleProfileIndex is 0 this field defines the
profile ID which will be assigned to frames matching this rule.
This is the dynamically assigned value and may differ from the
administratively configured value.
If the etsysPolicyRuleProfileIndex is not 0 then this field
defines the VLAN ID with which to mark a frame matching this
PolicyNonVolatileRule.
Note that three special, otherwise illegal, values of the
etsysPolicyNonVolatileRuleVlan are used in defining the
forwarding action.
-1 Indicates that no VLAN or forwarding behavior
modification is desired. A rule will not be matched
against for the purpose of determining a marking
VID if this value is set.
0 Indicates that the default forwarding action
is to drop the packets matching this rule.
4095 Indicates that the default forwarding action
is to forward any packets matching this rule.
Context
- MIB
- ENTERASYS-POLICY-PROFILE-MIB
- OID
.1.3.6.1.4.1.5624.1.2.6.11.20.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- etsysPolicyNonVolatileRuleEntry
- Table
- etsysPolicyNonVolatileRuleTable
- Siblings
- 11
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-4095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysPolicyNonVolatileRuleResult2 If the etsysPolicyRuleProfileIndex is 0 this field defines
the profile ID which the managing entity desires assigned to
frames matching this rule. This is the administrative va… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.20.1.11 |
| etsysPolicyNonVolatileRuleAuditSyslogEnable If enabled, a syslog message is sent when a bit in the
etsysPolicyNonVolatileRuleUsageList transitions from 0 to 1. | column | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.20.1.12 |
| etsysPolicyNonVolatileRuleAuditTrapEnable If enabled, an SNMP NOTIFICATION is sent when a bit in the
etsysPolicyNonVolatileRuleUsageList transitions from 0 to 1. | column | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.20.1.13 |
| etsysPolicyNonVolatileRuleDisablePort If enabled, a port is disabled (ifOperStatus of the
corresponding ifIndex will be down) when a bit in the
etsysPolicyNonVolatileRuleUsageList transitions from 0 to 1. | column | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.20.1.14 |
| etsysPolicyNonVolatileRuleOperPid If the etsysPolicyRuleProfileIndex is 0 then this field
contains the currently applied profile ID for frames
matching this rule. This may be either the administratively
applied … | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.20.1.15 |
| etsysPolicyNonVolatileRuleOverwriteTCI If set, the information contained within the TCI field of
inbound, tagged packets will not be used by the device after
the ingress classification stage of packet relay. The net … | column | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.20.1.16 |
| etsysPolicyNonVolatileRuleMirrorIndex A reference to a packet mirror destination (defined elsewhere).
A value of (-1) indicates no mirror is specified, but a mirror is
not explicitly prohibited.
… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.20.1.17 |
| etsysPolicyNonVolatileRuleQuarantineProfileIndex If the etsysPolicyRuleProfileIndex is not 0 this field defines
the profile ID which will be used as the quarantine provisioning
agents mux response for the mac address and port … | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.20.1.18 |
| etsysPolicyNonVolatileRuleRowStatus The status of this row.
When active(1) this entry's classification rule,
is one of its associated policy's set of rules.
When this entry's associate… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.5624.1.2.6.11.20.1.7 |
| etsysPolicyNonVolatileRuleStorageType The storage type of this row.
For all entries in the table this is set to nonVolatile(1),
and as such, this entry's classification rule will be added
to non-volati… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.5624.1.2.6.11.20.1.8 |
| etsysPolicyNonVolatileRuleUsageList When read, a set bit indicates that this rule was used to
classify traffic on the corresponding port. | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.5624.1.2.6.11.20.1.9 |