etsysOspfExtIfMtuIgnore
ENTERASYS-OSPF-EXT-MIB ·
.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.12
Object
This object controls whether OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description packet is higher than the MTU size configured on the incoming interface, the OSPF adjacency will not be established. If the interface is tunneled over, say, an MPLS network, then the administrator may not know the maximum MTU size and so can tell OSPF to ignore the MTU size on incoming DB description packets.
Context
- MIB
- ENTERASYS-OSPF-EXT-MIB
- OID
.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- etsysOspfExtIfEntry
- Table
- etsysOspfExtIfTable
- Siblings
- 11
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysOspfExtIfOperStatus The current operational state of OSPF on this interface. | column | EtsysOspfOperStatus | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.1 |
| etsysOspfExtIfFastHelloMultiplier The number of Hellos that should be sent within 1 second when
using Fast Hellos on this interface. This value does not have
to be same for all routers attached to a common networ… | column | Unsigned32 | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.10 |
| etsysOspfExtIfAutoDeleteNbr Whether dynamically created entries in the ospfNbrTable
should be kept when the adjacency goes down.
If this object is set to 'false', then a dynamically created
en… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.11 |
| etsysOspfExtIfNetMask The subnet mask associated with the IP address of this entry.
The value of the mask is an IP address with all the network bits
set to 1 and all the hosts bits set to 0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.2 |
| etsysOspfExtIfTransmitTimerDelay The time this interface will delay a LSU packet, in order to
add more LSAs to the packet before sending. Setting this
correctly can reduce the network traffic. This is configura… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.3 |
| etsysOspfExtIfIPMaxPacketSize Maximum transfer unit (MTU) for the network interface.
This is the maximum packet size in bytes for packets sent over
the network interface. This size excludes lin… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.4 |
| etsysOspfExtIfPassive Indicates whether this interface is a passive interface. If
set to 'true', we suppress HELLO packets sent on and received
from this interface. We will therefore advertise this i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.5 |
| etsysOspfExtIfLsaRefreshIntvl Self-originated LSAs are periodically reflooded into the
routing domain, to add to the robustness of the OSPF protocol.
This value determines the interval between refreshes of LSA… | column | seconds Unsigned32 | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.6 |
| etsysOspfExtIfHelperModePolicy Indicates whether OSPF will help a neighbor undergoing
hitless restart on this interface for the specified reason. This
field contains a bit flag for each of OspfHitlessRestartRea… | column | Bits | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.7 |
| etsysOspfExtIfMaxHitlessGracePeriod If configured to help neighbors undergoing hitless restart on
this interface, this field indicates the maximum grace period
that will be allowed for a neighboring router undergoin… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.8 |
| etsysOspfExtIfAuthUserData Authentication user data for interface level authentication.
This data is passed opaquely to the authentication process,
where it can be used to assist with authent… | column | OctetString | .1.3.6.1.4.1.5624.1.2.65.1.2.2.1.9 |