etsysNatListRuleInetVersion
ENTERASYS-NAT-MIB ·
.1.3.6.1.4.1.5624.1.2.75.2.3.1.1
Object
column
INET-ADDRESS-MIBInetVersion
The Internet address version of the NAT List rule. The value of etsysNatListRuleInetVersion must be consistent with the value of etsysNatPoolAddressType defined by the etsysNatPoolName associated with this etsysNatListRuleEntry.
Context
- MIB
- ENTERASYS-NAT-MIB
- OID
.1.3.6.1.4.1.5624.1.2.75.2.3.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- etsysNatListRuleEntry
- Table
- etsysNatListRuleTable
- Siblings
- 10
Syntax
INET-ADDRESS-MIBInetVersion
- Source
- INET-ADDRESS-MIBInetVersion
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysNatListRuleHits The total number of hits this NAT List rule entry has
received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5624.1.2.75.2.3.1.10 |
| etsysNatListRuleRowStatus This object permits management of the table by facilitating
actions such as row creation and deletion.
The value of this object has no effect on whether other objec… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.5624.1.2.75.2.3.1.11 |
| etsysNatListRuleDirection This value identifies if this NAT List rule is associated with
an 'inside' or 'outside' network. | column | Enumeration | .1.3.6.1.4.1.5624.1.2.75.2.3.1.2 |
| etsysNatListRuleMatchType This value identifies if this NAT List rule is associated with
a 'source' or 'destination' packet. | column | Enumeration | .1.3.6.1.4.1.5624.1.2.75.2.3.1.3 |
| etsysNatListRuleName This object contains the unique name of the access-list of IP
addresses to translate for the inside source address defined by
this NAT List rule. | column | OctetString | .1.3.6.1.4.1.5624.1.2.75.2.3.1.4 |
| etsysNatListRuleInsideVrfName This object contains the unique name of the Inside VRF for
cross VRF NAT for this NAT List rule. | column | OctetString | .1.3.6.1.4.1.5624.1.2.75.2.3.1.5 |
| etsysNatListRulePoolName This object contains the unique name of the NAT Pool. This
value must be set with the row status set that creates the
entry. The value may not be changed after the row is crea… | column | OctetString | .1.3.6.1.4.1.5624.1.2.75.2.3.1.6 |
| etsysNatListRuleIfIndex The outside NAT List rule interface index used for this NAT
List rule entry. A value of '0' indicates that this List Rule
would apply to 'any' interface. This value must be set… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5624.1.2.75.2.3.1.7 |
| etsysNatListRuleOverloaded This entry indicates if this NAT List rule entry will be
overloaded enabling Network Address Port Translation (NAPT).
This value must be set with the row status set that creates … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5624.1.2.75.2.3.1.8 |
| etsysNatListRuleConns The current number of active NAT connections established on
this NAT List rule entry. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5624.1.2.75.2.3.1.9 |