etsysFlowLimitingIntfClassType
ENTERASYS-FLOW-LIMITING-MIB ·
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.1
Object
column
r/w
FlowLmtIntfClass
The Flow Limiting interface class associated with this
interface. The class defines the flow limits and actions
to be taken when those limits are exceeded.
When the value of this object changes and flow limiting is
currently enabled, both globally and on this interface, the
agent MUST perform the following steps prior to enforcing
the new limits:
1) If the interface had been operationally held in the 'down'
state due to prior flow conditions it MUST be allowed to
attain its currently correct operational state.
2) Any flows created by the Flow Limiting feature for this
interface must be removed.
3) The respective etsysFlowLimitingIntfFlowCountEvents and
etsysFlowLimitingIntfSetupRateEvents objects MUST be set
to zero.
4) etsysFlowLimitingIntfStatus and etsysFlowLimitingIntfReason
MUST be set to operational(1) and noAction(1) respectively.
Maintaining the value of this object across agent reboots
is REQUIRED.
Context
- MIB
- ENTERASYS-FLOW-LIMITING-MIB
- OID
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- etsysFlowLimitingInterfaceEntry
- Table
- etsysFlowLimitingInterfaceTable
- Siblings
- 13
Syntax
FlowLmtIntfClass
- Source
- FlowLmtIntfClass
- Base type
Enumeration
Values & Constraints
Type Values
1 | userPort |
2 | serverPort |
3 | aggregatedUserPort |
4 | interSwitchLink |
5 | unspecified |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysFlowLimitingIntfSetupRateCurrent The current flow setup rate on this interface.
This information is always available and current. | column | flows/second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.10 |
| etsysFlowLimitingIntfSetupRateMax The maximum flow setup rate on this interface since the
last agent reset. This information is always available
and current. | column | flows/second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.11 |
| etsysFlowLimitingIntfSetupRateMaxTime The TimeTicks since the maximum flow setup rate was recorded.
This information is always available and current. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.12 |
| etsysFlowLimitingIntfSetupRateEvents The number of times that the setup rate on this interface
exceeded any associated limit. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.13 |
| etsysFlowLimitingIntfFlowProcessingLayer The highest OSI layer at which flows are processed. This is
used to give an indication of how much detail is contained in
the flows created on the interface. An interface repor… | column | FlowLmtIntfLayer | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.14 |
| etsysFlowLimitingIntfFlowLimitingState The enable state of Flow Limiting on this interface.
Setting this object to disabled(2) will disable the
active part of the Flow Limiting feature as defined
for the… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.2 |
| etsysFlowLimitingIntfStatus The current status of the interface with respect to Flow
Limiting.
A read of operational(1) indicates that the Flow Limiting
feature has not taken any action to ope… | column | Enumeration | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.3 |
| etsysFlowLimitingIntfReason The reason the last action was taken on this interface
by the Flow Limiting feature. Maintaining the value of
this object across agent reboots is NOT RECOMMENDED. | column | Enumeration | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.4 |
| etsysFlowLimitingIntfClearStats When set to true(1) the following objects in this row MUST
be set to zero:
etsysFlowLimitingIntfFlowCountMaxTime
etsysFlowLimitingIntfFlowCountEvents
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.5 |
| etsysFlowLimitingIntfFlowCountCurrent The current number of flows active on this interface.
This information is always available and current. | column | flows SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.6 |
| etsysFlowLimitingIntfFlowCountMax The maximum number of flows that have been active on this
interface since the last agent reset. This information is
always available and current. | column | flows SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.7 |
| etsysFlowLimitingIntfFlowCountMaxTime The TimeTicks since the maximum number of flows was recorded.
This information is always available and current. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.8 |
| etsysFlowLimitingIntfFlowCountEvents The number of times that the number of flows on this interface
exceeded any associated limit. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5624.1.2.43.1.3.1.1.9 |