etsysCosOrlResourceUnits
ENTERASYS-CLASS-OF-SERVICE-MIB ·
.1.3.6.1.4.1.5624.1.2.55.1.6.9.1.2
Object
column
r/w
EtsysCosRateTypes
Identifies the unit size for the etsysCosOrlPortRate. Values MUST NOT exceed the capacity of the etsysCosOrlPortType they are associated with.
Context
- MIB
- ENTERASYS-CLASS-OF-SERVICE-MIB
- OID
.1.3.6.1.4.1.5624.1.2.55.1.6.9.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- etsysCosOrlResourceEntry
- Table
- etsysCosOrlResourceTable
- Siblings
- 8
Syntax
EtsysCosRateTypes
- Source
- EtsysCosRateTypes
- Base type
Bits
Values & Constraints
Type Values
0 | percentage |
1 | pps |
2 | kbps |
3 | mbps |
4 | gbps |
5 | tbps |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysCosOrlResourceOrlNum The outbound rate limiter number associated with this entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.1 |
| etsysCosOrlResourceRate Identifies the number of units above which packets will
considered in violation. This object is read-only for limiters
of type count(5). The value (0) shall carry special meaning… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.3 |
| etsysCosOrlResourceParentOrl Setting this object to a positive value indicates the
etsysCosOrlResourceOrlNum to be used in conjunction with
this setting. A value of (-1) indicates the parent Orl is
not conf… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.4 |
| etsysCosOrlResourceType The characteristics applied to this rate limiter. When
chaining limiters is used, the AND / OR attribute denotes the
limiter logic in handling violation. For example, option
re… | column | EtsysRateLimitingType | .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.5 |
| etsysCosOrlResourceActionCosIndex This object will represent the CoS to be applied to packets
in violation of the limits set when the etsysCosOrlResourceType
is set to one of the rePrioritize types. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.6 |
| etsysCosOrlResourceAction This object allows syslog, SNMP traps, or disabling actions
to be taken limiters are first exceeded. | column | EtsysViolationAction | .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.7 |
| etsysCosOrlResourceViolationPortList The dot1dBridge ports this limiter has been violated on.
Writing this object will clear the dot1dBridge ports given
which have a corresponding bit of zero (0) in the PortList. | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.8 |
| etsysCosOrlResourceClearCounters This object shall always read false(2). When set to true(1)
this object clears the counter associated with this entry, if
the associated entry is a limiter of type count(5). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.9 |