podInputPhaseConfigOverloadRestriction

ENLOGIC-PDU2-MIB · .1.3.6.1.4.1.38446.3.3.2.1.3
MIB view Table view

Object

column r/w Enumeration 
This OID controls the behavior of a Switched PDU Input Phase when an 
overload condition is possible and additional outlets are requested 
to be turned on. Setting this OID to alwaysAllowTurnON (1) will always 
allow the outlets on the corresponding Input Phase to turn on. Setting 
this OID to restrictOnUpperWarning (2) will not allow outlets on the 
corresponding Input Phase to turn on if the 
podInputPhaseConfigUpperWarningThreshold OID is exceeded. Setting 
this OID to restrictOnUpperCritical (3) will not allow outlets on 
the corresponding Input Phase to turn on if the 
podInputPhaseConfigUpperCriticalThreshold OID is exceeded. Models 
that do not support this feature will respond to this OID with a 
value of notSupported (4). Attempts to set this OID in these 
models will fail.

Context

MIB
ENLOGIC-PDU2-MIB
OID
.1.3.6.1.4.1.38446.3.3.2.1.3
Type
column
Access
readwrite
Status
current
Parent
podInputPhaseConfigEntry
Table
podInputPhaseConfigTable
Siblings
16

Syntax

Enumeration

Values & Constraints

Enumerated Values
1alwaysAllowTurnOn
2restrictOnUpperWarning
3restrictOnUpperCritical
4notSupported

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
podInputPhaseConfigIndex
The index of the PDU Input Phase configuration table entry
columnInteger32.1.3.6.1.4.1.38446.3.3.2.1.1
podInputPhaseConfigVoltageUpperCriticalThreshold
User-defined upper critical input phase voltage alarm threshold in Volts(V).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.10
podInputPhaseConfigVoltageUpperWarningThreshold
User-defined upper non-critical (warning) input phase voltage alarm threshold in Volts(V).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.11
podInputPhaseConfigCurrentAlarmResetThreshold
The hysteresis used for current alarm deassertions in hundredths of Amps(A).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.12
podInputPhaseConfigCurrentAlarmStateChangeDelay
The delay measured in samples before a current state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.38446.3.3.2.1.13
podInputPhaseConfigCurrentEnabledThresholds
A bit string indicating which current alarm thresholds are enabled.
columnBits.1.3.6.1.4.1.38446.3.3.2.1.14
podInputPhaseConfigVoltageAlarmResetThreshold
The hysteresis used for voltage alarm deassertions in Volts(V).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.15
podInputPhaseConfigVoltageAlarmStateChangeDelay
The delay measured in samples before a voltage state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.38446.3.3.2.1.16
podInputPhaseConfigVoltageEnabledThresholds
A bit string indicating which voltage alarm thresholds are enabled.
columnBits.1.3.6.1.4.1.38446.3.3.2.1.17
podInputPhaseConfigCount
The total number of Input Phases
columnInteger32.1.3.6.1.4.1.38446.3.3.2.1.2
podInputPhaseConfigCurrentLowerCriticalThreshold
User-defined lower critical input phase current alarm threshold in hundredths of Amps(A).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.4
podInputPhaseConfigCurrentLowerWarningThreshold
User-defined lower non-critical (warning) input phase current alarm threshold in hundredths of Amps(A).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.5
podInputPhaseConfigCurrentUpperCriticalThreshold
User-defined upper critical input phase current alarm threshold in hundredths of Amps(A).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.6
podInputPhaseConfigCurrentUpperWarningThreshold
User-defined upper non-critical (warning) input phase current alarm threshold in hundredths of Amps(A).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.7
podInputPhaseConfigVoltageLowerCriticalThreshold
User-defined lower critical input phase voltage alarm threshold in Volts(V).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.8
podInputPhaseConfigVoltageLowerWarningThreshold
User-defined lower non-critical (warning) input phase voltage alarm threshold in Volts(V).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.38446.3.3.2.1.9