eltMesRouteMapContinue
ELTEX-MES-IP ·
.1.3.6.1.4.1.35265.1.23.91.5.1.1.29
Object
Field containing the number of the route map clause to
continue processing at.
For a series of eltMesRouteMapTable rows that are ANDed
together (that is, the eltMesRouteMapMatchAnd field is set to
TRUE for all of the series except the last),
eltMesRouteMapContinue can be used irrespective of the
eltMesRouteMapType. That is, eltMesRouteMapType can be permit
or deny for the series.
For a series of route attribute changes (that is, a series
of eltMesRouteMapTable rows that modify the route attributes
of a permitted route, where the rows are linked with the
eltMesRouteMapContinue field), all of the rows must have
eltMesRouteMapType permit.
If the route map matches, the set commands for the
matching clause will be applied, and filtering will then
continue from the route map clause specified in this
field.
If no continue clause is specified (value of 0), or the
referenced route map clause does not exist, then
processing for the given route will be complete.
The continue field references the rlRouteMapPbrRouteMapSectionId field
of the desired clause. In order to prevent processing
loops, the continue clause must have a higher number than
the current clause.
Context
- MIB
- ELTEX-MES-IP
- OID
.1.3.6.1.4.1.35265.1.23.91.5.1.1.29- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eltMesRouteMapEntry
- Table
- eltMesRouteMapTable
- Siblings
- 28
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eltMesRouteMapMatchAddrPrefixListName The name of the IP Prefix access list used to match
the NLRI attribute against. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.35265.1.23.91.5.1.1.1 |
| eltMesRouteMapMatchAnd Indicates that the match statements in this route map
should be logically ANDed with the match statements in the
route map indicated by eltMesRouteMapContinue. This field is
only… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.10 |
| eltMesRouteMapActionAS The number of times the local AS number is prepended to
the AS path if there is a match. This is only relevant if
the route map is being used for exporting routes, or for
setting… | column | Unsigned32 | .1.3.6.1.4.1.35265.1.23.91.5.1.1.11 |
| eltMesRouteMapActionASOperation Whether or not the value in rlRouteMapPbrActionAS should be used
for updating attributes. The possible action values are:
none - Ignore eltMesRouteMapActionAS and … | column | ELTEX-BGP-MIBEltexBgpRouteMapAsPathAction | .1.3.6.1.4.1.35265.1.23.91.5.1.1.12 |
| eltMesRouteMapActionASLimUpper If there is a match this will cause the AS_PATHLIMIT
attribute to be added if it does not already exist. If
it does exist then it will be replaced. In either case the
specified … | column | Unsigned32 | .1.3.6.1.4.1.35265.1.23.91.5.1.1.13 |
| eltMesRouteMapActionASLimUpperDef Whether or not the value in eltMesRouteMapActionASLimUpper should be
used for updating attributes. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.14 |
| eltMesRouteMapActionAsPrependCount To prepend AS numbers to the AS-Path, set
eltMesRouteMapActionAsPrependCount to the count of the AS numbers
to prepend, set eltMesRouteMapActionAsPrependSize to indicate
whether t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.35265.1.23.91.5.1.1.15 |
| eltMesRouteMapActionAsPrependSize The size of AS numbers in the field
eltMesRouteMapActionAsPrependAsVals to prepend to the AS path if
there is a match. This field is only used if
eltMesRouteMapActionAsPrependCou… | column | ELTEX-BGP-MIBEltexBgpAsSize | .1.3.6.1.4.1.35265.1.23.91.5.1.1.16 |
| eltMesRouteMapActionAsPrependAsVals An array containing the AS numbers to prepend to the AS
path if there is a match. The length of each AS number is
given by eltMesRouteMapActionAsPrependSize. This field is only
… | column | OctetString | .1.3.6.1.4.1.35265.1.23.91.5.1.1.17 |
| eltMesRouteMapActionAsRemove Contains the regular expression to use to remove AS
numbers from an AS-Path for a route.
This is stored here in ASCII format. AS numbers are
matched as decimal num… | column | OctetString | .1.3.6.1.4.1.35265.1.23.91.5.1.1.18 |
| eltMesRouteMapActionLocPref The value to set the Local Pref to if there is a match. This
value is only used if eltMesRouteMapActionLocPrefDef is TRUE. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.35265.1.23.91.5.1.1.19 |
| eltMesRouteMapMatchNextPrefixListName The name of the IP Prefix access list used to match
the Next Hop attribute against. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.35265.1.23.91.5.1.1.2 |
| eltMesRouteMapActionLocPrefDef Whether or not the value in eltMesRouteMapActionLocPref should be
used for updating attributes. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.20 |
| eltMesRouteMapActionMed The value to set the MED to if there is a match. A value of
0 indicates that the MED should be removed. This value is
only used if eltMesRouteMapActionMedDef is TRUE. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.35265.1.23.91.5.1.1.21 |
| eltMesRouteMapActionMedDef Whether or not the value in eltMesRouteMapActionMed should be
used for updating attributes. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.22 |
| eltMesRouteMapActionOrigin The value to set the Origin to if there is a match. This
value is only used if eltMesRouteMapActionOriginDef is TRUE. | column | ELTEX-BGP-MIBEltexBgpOriginCode | .1.3.6.1.4.1.35265.1.23.91.5.1.1.23 |
| eltMesRouteMapActionOriginDef Whether or not the value in eltMesRouteMapActionOrigin should be
used for updating attributes. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.24 |
| eltMesRouteMapActionWeight The value to set the Weight to if there is a match. This
value is only used if eltMesRouteMapActionWeightDef is TRUE. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.35265.1.23.91.5.1.1.25 |
| eltMesRouteMapActionWeightDef Whether or not the value in eltMesRouteMapActionWeight should be
used for updating attributes. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.26 |
| eltMesRouteMapActionNextHopPeer If set to 'true' in an import route map, then routes matching
this route-map will have their Next Hop set to the peer's
address. This field has no effect on route maps used for
a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.27 |
| eltMesRouteMapType The type of route map entry. This is only relevant for
policy filtering route maps. It indicates the action
which should apply to a route which matches the route map
entry. Thi… | column | EltMesRouteMapPermitOrDeny | .1.3.6.1.4.1.35265.1.23.91.5.1.1.28 |
| eltMesRouteMapMatchSourcePrefixListName The name of the IP Prefix access list used to match
the source address against. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.35265.1.23.91.5.1.1.3 |
| eltMesRouteMapMatchLocPref The value to match the Local Preference attribute against.
This value is only used if eltMesRouteMapMatchLocPrefDef is TRUE.
If a route does not contain a local pre… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.35265.1.23.91.5.1.1.4 |
| eltMesRouteMapMatchLocPrefDef Whether or not the value in eltMesRouteMapMatchLocPref should be
used for matching. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.5 |
| eltMesRouteMapMatchMed The value to match the Multiple Exit Descriminator attribute
against. A value of 0 indicates a match on no MED or a MED
of 0. This value is only used if eltMesRouteMapMatchMedDe… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.35265.1.23.91.5.1.1.6 |
| eltMesRouteMapMatchMedDef Whether or not the value in eltMesRouteMapMatchMed should be used
for matching. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.7 |
| eltMesRouteMapMatchOrigin The value to match the Origin attribute against. This
value is only used if eltMesRouteMapMatchOriginDef is TRUE. | column | ELTEX-BGP-MIBEltexBgpOriginCode | .1.3.6.1.4.1.35265.1.23.91.5.1.1.8 |
| eltMesRouteMapMatchOriginDef Whether or not the value in eltMesRouteMapMatchOrigin should be
used for matching. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.1.23.91.5.1.1.9 |