eltexBgpPeerGroupKeepAliveConfigd
ELTEX-BGP-MIB ·
.1.3.6.1.4.1.35265.45.1.2.2.1.1.12
Object
column
r/w
Unsigned32
Time interval in seconds for the KeepAlive configured for
this BGP speaker with this peer. The value of this object
will only determine the KEEPALIVE messages frequency
relative to the value specified in eltexBgpPeerGroupHoldTimeConfigd
the actual time interval for the KEEPALIVE messages is
indicated by eltexBgpPeerStatusKeepAlive. A reasonable
maximum value for this timer would be configured to be one
third of that of eltexBgpPeerGroupHoldTimeConfigd.
The value of this object is only allowed to be zero (0) if
the value of eltexBgpPeerGroupHoldTimeConfigd is also zero (0).
If the value of this object is zero (0), no periodical
KEEPALIVE messages are sent to the peer after the BGP
connection has been established. The suggested value for
this timer is 30 seconds.
This field can be changed at any time. However, if the
field is changed while the peer is admin_status UP, the
change will only take effect after the peer has been
cycled admin_status DOWN and then UP, thus forcing the
peer session to be restarted.
Context
- MIB
- ELTEX-BGP-MIB
- OID
.1.3.6.1.4.1.35265.45.1.2.2.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eltexBgpPeerGroupEntry
- Table
- eltexBgpPeerGroupTable
- Siblings
- 21
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-21845
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eltexBgpPeerGroupName The name of this eltexBgpPeerGroupEntry. This is the index of the
peer group. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.35265.45.1.2.2.1.1.1 |
| eltexBgpPeerGroupConnectRetryInterval Time interval for the ConnectRetry timer. The suggested
value for this timer is 120 seconds.
This field can be changed at any time. However, if the
field is chang… | column | Unsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.10 |
| eltexBgpPeerGroupHoldTimeConfigd Time interval in seconds for the Hold Time configured for
this BGP speaker with this peer. This value is placed in
an OPEN message sent to this peer by this BGP speaker, and
is c… | column | Unsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.11 |
| eltexBgpPeerGroupMinRouteAdvertiseInterval Time interval in seconds for the
MinRouteAdvertisementInterval timer. This determines the
minimum time between a BGP UPDATE to a peer advertising or
withdrawing a route and a sub… | column | Unsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.13 |
| eltexBgpPeerGroupMinASOriginationInterval Time interval in seconds for determining the minimum amount
of time that must elapse between successive advertisements of
UPDATE messages that report changes to a route within the… | column | Unsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.14 |
| eltexBgpPeerGroupMinRouteWithdrawInterval Time interval in seconds for the MinRouteWithdrawInterval
timer. This is the interval which is enforced between
advertisement and subsequent withdrawal of a route.
… | column | Unsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.15 |
| eltexBgpPeerGroupConfigOpenDelay The delay to enforce in between a TCP connection with this
peer becoming established and a BGP Open message being
sent. If this delay is zero, then no delay will be
injected, and… | column | Unsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.16 |
| eltexBgpPeerGroupConfigIdleHold The time to hold this peer in Idle state after a BGP
session has progressed beyond Idle state initially and
then returned to it. No new connections will be initiated
or accepted … | column | Unsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.17 |
| eltexBgpPeerGroupDistListPlIn The Prefix List name identifying the Prefix List to use
to filter routes received from the peer. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.35265.45.1.2.2.1.1.18 |
| eltexBgpPeerGroupDistListPlOut The Prefix List name identifying the Prefix List to use
to filter routes advertised to the peer. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.35265.45.1.2.2.1.1.19 |
| eltexBgpPeerGroupRowStatus The row status for this BGP peer group table entry, used to
create and destroy table entries. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.35265.45.1.2.2.1.1.2 |
| eltexBgpPeerGroupReflectorClient This value indicates whether the given peer is a reflector
client of this router, or not. A value of nonClient(0)
indicates that this peer is not a reflector client. A
value of … | column | EltexBgpPeerReflectorClientType | .1.3.6.1.4.1.35265.45.1.2.2.1.1.20 |
| eltexBgpPeerGroupSoftResetWithStoredInfo This option causes all routes learned from a peer to be stored
so that the ARI can be recalculated (for example, due to a
change in import policy) without performing a route refr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.45.1.2.2.1.1.21 |
| eltexBgpPeerGroupBfdDesired Indicates whether Bidirectional Forwarding Detection (BFD)
is desired for peers in this peer group.
This field can be changed at any time. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.45.1.2.2.1.1.22 |
| eltexBgpPeerGroupRemoteAs The remote autonomous system number.
For individual peers, this can be configured using
eltexBgpPeerRemoteAs.
This field can be changed at any time. … | column | EltexBgpAutonomousSystemNumber | .1.3.6.1.4.1.35265.45.1.2.2.1.1.3 |
| eltexBgpPeerGroupSourceInterface The interface index for the interface from which the
source address for session is chosen. If non-zero, BGP
will look for the first address on this interface with a
type matching… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.35265.45.1.2.2.1.1.4 |
| eltexBgpPeerGroupNxtHopSlf When eltexBgpPeerGroupNxtHopSlf is 'true', routes will be
advertised to the peer with NEXT_HOP attribute set to
BGP router local address. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.45.1.2.2.1.1.5 |
| eltexBgpPeerGroupConfigMaxPrfx This object is used to limit the number of prefixes that
can be accepted from this peer.
Setting eltexBgpPeerGroupConfigMaxPrfx to a non-zero value sets
the maximu… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.6 |
| eltexBgpPeerGroupConfigDropWarn This object is used to determine whether the session is
dropped or a warning is generated when the maximum number
of prefixes set is exceeded.
Setting eltexBgpPeer… | column | EltexBgpConfigDropOrWarn | .1.3.6.1.4.1.35265.45.1.2.2.1.1.7 |
| eltexBgpPeerGroupMaxPrfxHold The time interval in seconds between when this BGP session
is turn down due to the number of prefixes received from
this peer exceeding the maximum in
eltexBgpPeerGroupConfigMaxPr… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.8 |
| eltexBgpPeerGroupConfigThreshold A percentage of the limit set by eltexBgpPeerGroupConfigMaxPrfx.
When the number of prefixes received from this peer reaches
this threshold, BGP issues a warning.
T… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.35265.45.1.2.2.1.1.9 |