switchPortStatsGroupID

ELH100-MIB · .1.3.6.1.4.1.52.259.10.3.4.2.1.1.1
MIB view Table view

Object

column mandatory Integer32 
The group ID of the switch module port being referenced.  If the
group is not present, or if there is no switch module installed
in the group, GetRequests and SetRequests are rejected with an
error-status of noSuchName(2).  GetNextRequests skip entries for
nonexistent modules.

Context

MIB
ELH100-MIB
OID
.1.3.6.1.4.1.52.259.10.3.4.2.1.1.1
Type
column
Access
readonly
Status
mandatory
Parent
switchPortStatsEntry
Table
switchPortStatsTable
Siblings
16

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
switchPortCollisions mandatory
The number of collisions detected on the port.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.10
switchPortLateEvents mandatory
The number of collisions detected on the port that occurred later than 512 bit-times into the transmission of a packet.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.11
switchPortVeryLongEvents mandatory
The number of times any activity continued for more than 4 to 7.5 milliseconds.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.12
switchPortDataRateMismatches mandatory
The number of times the incoming data rate mismatched the local clock source enough to cause a FIFO overflow or underflow.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.13
switchPortAutoPartitions mandatory
The number of times this port was auto-partitioned by the hardware. In 100Mbps mode, a port auto-partitions when it detects more than 60 consecutive collisions. In 10Mbps mode, …
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.14
switchPortBroadcastPackets mandatory
The number of good broadcast frames received by the port.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.15
switchPortMulticastPackets mandatory
The number of good multicast (not broadcast) frames received by the port.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.16
switchPortIsolates mandatory
The number of times this port was auto-isolated by the hardware. This occurs only during 100Mbps operation. A port auto-isolates when it transmits more than 2 consecutive false c…
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.17
switchPortStatsID mandatory
The port ID of the switch module port being referenced. Port 1 is always the internal 100Mbps port. Port 2 is always the internal 10Mbps port. Port 3 is always the external por…
columnInteger32.1.3.6.1.4.1.52.259.10.3.4.2.1.1.2
switchPortReadableFrames mandatory
The number of valid frames received by the port.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.3
switchPortReadableOctets mandatory
The number of octets (bytes) in all valid frames received by the port.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.4
switchPortFCSErrors mandatory
The number of valid-length frames received by the port that had FCS (frame check sequence) errors.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.5
switchPortAlignmentErrors mandatory
The number of valid-length frames received by the port that had alignment errors.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.6
switchPortFramesTooLong mandatory
The number of frames received by the port that were longer than 1518 bytes.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.7
switchPortShortEvents mandatory
The number of frames received by the port that were shorter than 82 bits.
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.8
switchPortRunts mandatory
The number of frames received by the port that were longer than 82 bits but shorter than 512 bits (64 bytes).
columnRFC1155-SMICounter.1.3.6.1.4.1.52.259.10.3.4.2.1.1.9