switchPortAlignmentErrors
ELH100-MIB ·
.1.3.6.1.4.1.52.259.10.3.4.2.1.1.6
Object
The number of valid-length frames received by the port that had alignment errors.
Context
- MIB
- ELH100-MIB
- OID
.1.3.6.1.4.1.52.259.10.3.4.2.1.1.6- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- switchPortStatsEntry
- Table
- switchPortStatsTable
- Siblings
- 16
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| switchPortStatsGroupID mandatory The group ID of the switch module port being referenced. If the
group is not present, or if there is no switch module installed
in the group, GetRequests and SetRequests are reje… | column | Integer32 | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.1 |
| switchPortCollisions mandatory The number of collisions detected on the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.10 |
| switchPortLateEvents mandatory The number of collisions detected on the port that occurred
later than 512 bit-times into the transmission of a packet. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.11 |
| switchPortVeryLongEvents mandatory The number of times any activity continued for more than
4 to 7.5 milliseconds. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.12 |
| switchPortDataRateMismatches mandatory The number of times the incoming data rate mismatched the local
clock source enough to cause a FIFO overflow or underflow. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.13 |
| switchPortAutoPartitions mandatory The number of times this port was auto-partitioned by the
hardware. In 100Mbps mode, a port auto-partitions when it
detects more than 60 consecutive collisions. In 10Mbps mode,
… | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.14 |
| switchPortBroadcastPackets mandatory The number of good broadcast frames received by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.15 |
| switchPortMulticastPackets mandatory The number of good multicast (not broadcast) frames received
by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.16 |
| switchPortIsolates mandatory The number of times this port was auto-isolated by the hardware.
This occurs only during 100Mbps operation. A port auto-isolates
when it transmits more than 2 consecutive false c… | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.17 |
| switchPortStatsID mandatory The port ID of the switch module port being referenced. Port 1 is
always the internal 100Mbps port. Port 2 is always the internal
10Mbps port. Port 3 is always the external por… | column | Integer32 | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.2 |
| switchPortReadableFrames mandatory The number of valid frames received by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.3 |
| switchPortReadableOctets mandatory The number of octets (bytes) in all valid frames received
by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.4 |
| switchPortFCSErrors mandatory The number of valid-length frames received by the port that
had FCS (frame check sequence) errors. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.5 |
| switchPortFramesTooLong mandatory The number of frames received by the port that were longer
than 1518 bytes. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.7 |
| switchPortShortEvents mandatory The number of frames received by the port that were shorter
than 82 bits. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.8 |
| switchPortRunts mandatory The number of frames received by the port that were longer
than 82 bits but shorter than 512 bits (64 bytes). | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.259.10.3.4.2.1.1.9 |