dhtRemoteSwitchStatus

ELECTROLINE-DHT-REMOTE-SWITCH-MIB · .1.3.6.1.4.1.5802.1.3.1.2.5.1.11.1.11.3
MIB view Table view

Object

scalar Enumeration 
Returns values related to the switch's status signal.
          
1 = Switch is ON (as per switch status signal)
2 = Switch is OFF (as per switch status signal)
3 = A status mismatch occurred between the switch's control pin and 
    the status pin  (reference: dhtRemoteSwitchControl). 
    If a mismatch occurs, the DHT turns the switch OFF but the 
    dhtRemoteSwitchControl  object reports its user-defined value. The 
    value of the dhtRemoteSwitchStatus object is latched.
    The dhtRemoteSwitchStatus object reverts to its normal operation (On/Off) 
    when a value is written to the dhtRemoteSwitchControl object.
    Also, if a mismatch occurs, the failsafe timer stops.  
                
4 = The failsafe timer timed out. The switch turns OFF.
    dhtRemoteSwitchControl is set to Off(1) position.
    This object reverts to its normal operation (On/Off)
when a value is written to the dhtRemoteSwitchControl object.

Context

MIB
ELECTROLINE-DHT-REMOTE-SWITCH-MIB
OID
.1.3.6.1.4.1.5802.1.3.1.2.5.1.11.1.11.3
Type
scalar
Access
readonly
Status
current
Parent
dhtRemoteSwitchManagement
Siblings
3

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dhtRemoteSwitchControl
Equipment control 1 = Turns the switch to the OFF position 2 = Turns the switch to the ON position Default: Off(1)
scalarEnumeration.1.3.6.1.4.1.5802.1.3.1.2.5.1.11.1.11.1
dhtRemoteSwitchAutoStopTimer
Defines the maximum ON time in minutes for the remote switch. Reset internal timer every time the switch is turned to the ON position with dhtRemoteSwitchControl object. This obj…
scalarInteger32.1.3.6.1.4.1.5802.1.3.1.2.5.1.11.1.11.2
dhtRemoteSwitchOnTime
Counts the amount of time in minutes the switch is ON. Writing 0 resets the counter. This object is set to 0 every time the DHT reboots (power cycle, sleep mode, reset). …
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.5802.1.3.1.2.5.1.11.1.11.4