dhtCfgHmsEms
ELECTROLINE-DHT-CONFIG-MIB ·
.1.3.6.1.4.1.5802.1.3.1.2.2.1.1
Object
node
This sub-tree contains configuration information for trap management.
Context
- MIB
- ELECTROLINE-DHT-CONFIG-MIB
- OID
.1.3.6.1.4.1.5802.1.3.1.2.2.1.1- Type
- node
- Status
- current
- Parent
- dhtCfgGlobal
- Siblings
- 6
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dhtCfgResetToFactory deprecated This MIB can be used to remotely restore the factory default values, thus overwriting
any other setup values (HMS and internal transponder settings) that were stored
in the DHT's… | scalar | Enumeration | .1.3.6.1.4.1.5802.1.3.1.2.2.1.2 |
| dhtCfgUsbMode deprecated This MIB controls the behavior of the USB port. In craft mode, the USB port
has a default MAC address which enables a PC to be connected locally to
any DHT with the same driver … | scalar | Enumeration | .1.3.6.1.4.1.5802.1.3.1.2.2.1.3 |
| dhtCfgTimers deprecated Group of configuration objects related to DHT timing.
Deprecated. Has been move into electrolineCommon branch | node | - | .1.3.6.1.4.1.5802.1.3.1.2.2.1.4 |
| dhtCfgIpInterfaces deprecated This sections specifies IP behavior for the DHT monitoring interface.
This section has been move to the electroline Common branch | node | - | .1.3.6.1.4.1.5802.1.3.1.2.2.1.5 |
| dhtCfgVendorInfo deprecated Vendor-specific information in human-readable format. When set, it mirrors and
overrides the mib commonVendorInfo from the SCTE tree.
Deprecated. Has been move into electrolineC… | scalar | OctetString | .1.3.6.1.4.1.5802.1.3.1.2.2.1.6 |
| dhtCfgHmsTimeReference deprecated This MIB controls the time reference that is applied in the SCTE HMS
tree. It affects how commonTime and alarmLogInformation time reference
are represented.
Set local(1… | scalar | Enumeration | .1.3.6.1.4.1.5802.1.3.1.2.2.1.7 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfgHmsEmsAddressTable This is the list of network addresses of the Element Management System(s)
to which the DHT will send its HmsColdStart, HmsWarmStart and HmsAlarmEvent traps.
The ent… | table | - | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1 |
| cfgEmsXpdrCustomField1 This MIB is used by the EEMS software to store user-defined data on
this DHT. This value has no impact on the DHT's operation, but is stored in
its non-volatile memory | scalar | OctetString | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.10 |
| cfgEmsXpdrCustomField2 This MIB is used by the EEMS software to store user-defined data on
this DHT. This value has no impact on the DHT's operation, but is stored in
its non-volatile memory | scalar | OctetString | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.11 |
| cfgEmsXpdrCustomField3 This MIB is used by the EEMS software to store user-defined data on
this DHT. This value has no impact on the DHT's operation, but is stored in
its non-volatile memory | scalar | OctetString | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.12 |
| cfgEmsTimeout This is the period of time (in seconds) during which the DHT expects to receive
an acknowlege trap from an EMS that has enabled trap assurance. If no acknowledge message
is rece… | scalar | Integer32 | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.2 |
| cfgEmsRetry This is the number of times that the DHT resends a trap to an EMS that has
enabled the trap assurance, if no acknowledge message is received.
The default value is zero, meaning … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.3 |
| cfgEmsDefaultHmsProperties This MIB can be used to reset all HMS properties (both analog and
discrete table entries) to their factory default values. | scalar | Enumeration | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.4 |
| cfgEmsCompatibilityMode obsolete This MIB is not currently supported by the DHT | scalar | Enumeration | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.5 |
| cfgEmsXpdrName This MIB is used by the EEMS software. Its value has no impact on the DHT's
operation, but is stored in its non-volatile memory | scalar | OctetString | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.6 |
| cfgEmsXpdrLocation This MIB is used by the EEMS software. Its value has no impact on the DHT's
operation, but is stored in its non-volatile memory | scalar | OctetString | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.7 |
| cfgEmsXpdrDescription This MIB is used by the EEMS software. Its value has no impact on the DHT's
operation, but is stored in its non-volatile memory | scalar | OctetString | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.8 |
| cfgEmsXpdrGroupPath This MIB is used by the EEMS software to indicate the logical group to
which this DHT belongs. This value has no impact on the DHT's operation, but is stored in
its non-volatil… | scalar | OctetString | .1.3.6.1.4.1.5802.1.3.1.2.2.1.1.9 |