pm1004AlmRxNrPortn
EKINOPS-Pm1004-MIB ·
.1.3.6.1.4.1.20044.18.2.3.3.211.1.6
Object
column
EKINOPS-MIBEkiOnOff
Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx part of the line transceiver is ready <Condtype> RX_NR_1 <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
Context
- MIB
- EKINOPS-Pm1004-MIB
- OID
.1.3.6.1.4.1.20044.18.2.3.3.211.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pm1004AlmlineXfp1AlarmsEntry
- Table
- pm1004AlmlineXfp1AlarmsTable
- Siblings
- 10
Syntax
EKINOPS-MIBEkiOnOff
- Source
- EKINOPS-MIBEkiOnOff
- Base type
Enumeration
Values & Constraints
Type Values
1 | off |
2 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pm1004AlmlineXfp1AlarmsIndex Index definition for the pm1004AlmlineXfp1Alarms
table | column | Integer32 | .1.3.6.1.4.1.20044.18.2.3.3.211.1.1 |
| pm1004AlmChannelNotAcquiredPortn Line DWDM Channel Not Acquired
:This OID indicates the transceiver
didn't tune the DWDM Channel succesfully.
<Help> This status indicates
the transceiver has not tuned
the … | column | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.3.3.211.1.11 |
| pm1004AlmWavelengthUnlockedPortn Line Optical Tx Wavelength Unlocked
:This OID indicates that the wavelength
error is exceeding the manufacturer
tolerance <Help> This alarm indicates
if the wavelenght of th… | column | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.3.3.211.1.15 |
| pm1004AlmTecFaultPortn Line Optical Tx Temp Regul Failed
:This OID indicates a failure on
the TEC module <Help> This alarm
indicates if the TEC of the line
transceiver is in fail condition
<Condt… | column | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.3.3.211.1.16 |
| pm1004AlmApdSupplyFaultPortn Line Rx Photodiode Power Failed
:This OID indicates a failure on
the APD power supply <Help> This
alarm indicates if the APD power
supply is in fail condition <Condtype>
AP… | column | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.3.3.211.1.17 |
| pm1004AlmModNrPortn Line Optical Module Not Ready
:This OID indicates that the module
is unable to determine correct
data. <Help> This alarm indicates
if the line transceiver is ready
<Condtyp… | column | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.3.3.211.1.3 |
| pm1004AlmRxCdrNotLockedPortn Line Optical Rx CDR Unlocked :This
OID indicates that a loss of lock
on the receiving side CDR has been
detected <Help> This alarm indicates
if the Rx CDR is locked in the
… | column | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.3.3.211.1.4 |
| pm1004AlmTxCdrNotLockedPortn Line Optical Tx CDR Unlocked :This
OID indicates a loss of lock on
the transmitting side CDR has been
detected. <Help> This alarm indicates
if the Tx CDR is locked in the
l… | column | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.3.3.211.1.7 |
| pm1004AlmTxFaultPortn Line Optical Tx Failure :This
OID indicates a fault condition
on the laser detected by the safety
syste <Help> This alarm indicates
if the laser of the line transceiver
is … | column | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.3.3.211.1.8 |
| pm1004AlmTxNrPortn Line Optical Tx Not Ready :This
OID indicates a condition has arisen
leading to invalid data on the
transmitting side <Help> This
alarm indicates if the Tx part
of the line… | column | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.3.3.211.1.9 |