pm1004AlmRxCdrNotLockedPortn

EKINOPS-Pm1004-MIB · .1.3.6.1.4.1.20044.18.2.3.3.211.1.4
MIB view Table view

Object

column EKINOPS-MIBEkiOnOff 
Line Optical Rx CDR Unlocked :This 
OID indicates that a loss of lock 
on the receiving side CDR has been 
detected  <Help>  This alarm indicates 
if the Rx CDR is locked in the
 line transceiver <Condtype> RX_CDR_NOT_LOCKED1_1 
<Probcause> receiveFailure (41) 
<Alarmtype> equipmentAlarm (5)
 <Polarity> (2)

Context

MIB
EKINOPS-Pm1004-MIB
OID
.1.3.6.1.4.1.20044.18.2.3.3.211.1.4
Type
column
Access
readonly
Status
current
Parent
pm1004AlmlineXfp1AlarmsEntry
Table
pm1004AlmlineXfp1AlarmsTable
Siblings
10

Syntax

EKINOPS-MIBEkiOnOff
Source
EKINOPS-MIBEkiOnOff
Base type
Enumeration

Values & Constraints

Type Values
1off
2on

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pm1004AlmlineXfp1AlarmsIndex
Index definition for the pm1004AlmlineXfp1Alarms table
columnInteger32.1.3.6.1.4.1.20044.18.2.3.3.211.1.1
pm1004AlmChannelNotAcquiredPortn
Line DWDM Channel Not Acquired :This OID indicates the transceiver didn't tune the DWDM Channel succesfully. <Help> This status indicates the transceiver has not tuned the …
columnEKINOPS-MIBEkiOnOff.1.3.6.1.4.1.20044.18.2.3.3.211.1.11
pm1004AlmWavelengthUnlockedPortn
Line Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wavelenght of th…
columnEKINOPS-MIBEkiOnOff.1.3.6.1.4.1.20044.18.2.3.3.211.1.15
pm1004AlmTecFaultPortn
Line Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail condition <Condt…
columnEKINOPS-MIBEkiOnOff.1.3.6.1.4.1.20044.18.2.3.3.211.1.16
pm1004AlmApdSupplyFaultPortn
Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition <Condtype> AP…
columnEKINOPS-MIBEkiOnOff.1.3.6.1.4.1.20044.18.2.3.3.211.1.17
pm1004AlmModNrPortn
Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is ready <Condtyp…
columnEKINOPS-MIBEkiOnOff.1.3.6.1.4.1.20044.18.2.3.3.211.1.3
pm1004AlmRxNrPortn
Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx part of the l…
columnEKINOPS-MIBEkiOnOff.1.3.6.1.4.1.20044.18.2.3.3.211.1.6
pm1004AlmTxCdrNotLockedPortn
Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is locked in the l…
columnEKINOPS-MIBEkiOnOff.1.3.6.1.4.1.20044.18.2.3.3.211.1.7
pm1004AlmTxFaultPortn
Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line transceiver is …
columnEKINOPS-MIBEkiOnOff.1.3.6.1.4.1.20044.18.2.3.3.211.1.8
pm1004AlmTxNrPortn
Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx part of the line…
columnEKINOPS-MIBEkiOnOff.1.3.6.1.4.1.20044.18.2.3.3.211.1.9