pm1004AlmObmTypeReadFail
EKINOPS-Pm1004-MIB ·
.1.3.6.1.4.1.20044.18.2.1.2.195.2
Object
scalar
EKINOPS-MIBEkiOnOff
OBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condtype> OBM_TYPE_READ_FAIL <Probcause> softwareError (47) <Alarmtype> processingErrorAlarm (4) <Polarity> (2)
Context
- MIB
- EKINOPS-Pm1004-MIB
- OID
.1.3.6.1.4.1.20044.18.2.1.2.195.2- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- pm1004AlmmodInitFailLevel3
- Siblings
- 10
Syntax
EKINOPS-MIBEkiOnOff
- Source
- EKINOPS-MIBEkiOnOff
- Base type
Enumeration
Values & Constraints
Type Values
1 | off |
2 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pm1004AlmGwIdentFail GW Ident Fail :This OID indicates
that GW identification has not
been read <Help> This alarm
indicates if the GW has been correctly
identified <Condtype> GW_IDENT_FAIL
<Pro… | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.1 |
| pm1004AlmClient2InitFail Client2 Init Fail :This OID indicates
that Client 2 registers subset
has not been correctly initialized
<Help> This alarm indicates if
the client port 2 is correctly
initia… | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.10 |
| pm1004AlmClient3InitFail Client3 Init Fail :This OID indicates
that Client 3 registers subset
has not been correctly initialized
<Help> This alarm indicates if
the client port 3 is correctly
initia… | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.11 |
| pm1004AlmClient4InitFail Client4 Init Fail :This OID indicates
that Client 4 registers subset
has not been correctly initialized
<Help> This alarm indicates if
the client port 4 is correctly
initia… | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.12 |
| pm1004AlmInitModuleFail Init Module Fail :This OID indicates
that the Module has not been correctly
initialized <Help> This alarm
indicates if the SW module is correctly
initialized <Condtype> INIT… | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.3 |
| pm1004AlmXfp1InitFail XFP1 Init Fail :This OID indicates
that the XFP has not been correctly
initialized <Help> This alarm
indicates if the line transceiver
1 is correctly initialized <Condtype> … | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.5 |
| pm1004AlmXfp2InitFail XFP2 Init Fail :This OID indicates
that the XFP has not been correctly
initialized <Help> This alarm
indicates if the line transceiver
2 is correctly initialized <Condtype> … | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.6 |
| pm1004AlmLine1InitFail Line1 Init Fail :This OID indicates
that the Line registersvsubset
has not been correctly initialized
<Help> This alarm indicates if
the line port 1 is correctly initialized… | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.7 |
| pm1004AlmLine2InitFail Line2 Init Fail :This OID indicates
that the Line register subset has
not been correctly initialized
<Help> This alarm indicates
if the line port 2 is correctly
initialized… | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.8 |
| pm1004AlmClient1InitFail Client1 Init Fail :This OID indicates
that Client 1 registers subset
has not been correctly initialized
<Help> This alarm indicates if
the client port 1 is correctly
initia… | scalar | EKINOPS-MIBEkiOnOff | .1.3.6.1.4.1.20044.18.2.1.2.195.9 |