swEgressAclMeterSrtcmCir
EGRESSACL-MIB ·
.1.3.6.1.4.1.171.12.89.4.1.1.19
Object
column
r/w
Integer32
Specifies the 'committed information rate' of 'single rate three color mode'. The unit is Kbps. A value of -1 indicates that this object is not active
Context
- MIB
- EGRESSACL-MIB
- OID
.1.3.6.1.4.1.171.12.89.4.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swEgressAclMeterEntry
- Table
- swEgressAclMeterTable
- Siblings
- 30
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swEgressAclMeterProfileID The ID of the ACL mask entry is unique in the mask list. The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.1 |
| swEgressAclMeterTrtcmConformState Specifies the action state when packet is in 'green color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet. | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.10 |
| swEgressAclMeterTrtcmConformReplaceDscp Specifies the DSCP value of the packet when the packet is in 'green color'.
A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.11 |
| swEgressAclMeterTrtcmConformCounterState Specifies the counter state when the packet is in 'green color'.
1. This is optional. The default is 'disabled'.
2. The resource may be limited so that the counter cannot … | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.12 |
| swEgressAclMeterTrtcmExceedState Specifies the action state when packet is in 'yellow color'.
permit: permit the packet.
replace-dscp: change the DSCP value of the packet.
drop: drop the packet. | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.13 |
| swEgressAclMeterTrtcmExceedReplaceDscp Specifies the DSCP value of packet when packet is in 'yellow color'.
A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.14 |
| swEgressAclMeterTrtcmExceedCounterState Specifies the counter state when packet is in 'yellow color'.
1. This is optional. The default is 'disabled'.
2. The resource may be limited so that the counter cannot be … | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.15 |
| swEgressAclMeterTrtcmViolateState Specifies the action state when packet is in 'red color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
drop: drop the packet. | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.16 |
| swEgressAclMeterTrtcmViolateReplaceDscp Specifies the DSCP value of the packet when packet is in 'red color'.
A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.17 |
| swEgressAclMeterTrtcmViolateCounterState Specifies the counter state when packet is in 'red color'.
1. This is optional. The default is 'disabled'.
2. The resource may be limited so that the counter cannot be tur… | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.18 |
| swEgressAclMeterAccessID The ID of the egress ACL rule entry as related to the swEgressAclMeterProfileID. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.2 |
| swEgressAclMeterSrtcmCbs Specifies the 'committed burst size' of 'single rate three color mode'.
The unit is Kbytes. That is to say, 1 means 1Kbytes.
The set value range is 0..N.The value N is determined … | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.20 |
| swEgressAclMeterSrtcmEbs Specifies the 'Excess burst size' of 'single rate three color mode'.
The unit is Kbytes. That is to say, 1 means 1kbytes.
The set value range is 0..N.The value N is determined by … | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.21 |
| swEgressAclMeterSrtcmColorMode Specifies the meter mode.
The default is color-blind mode. The final color of packet is determined
by the initial color of the packet and the metering result. | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.22 |
| swEgressAclMeterSrtcmConformState Specifies the action state when the packet is in 'green color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet. | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.23 |
| swEgressAclMeterSrtcmConformReplaceDscp Specifies the DSCP value of the packet when packet is in 'green color'.
A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.24 |
| swEgressAclMeterSrtcmConformCounterState Specifies the counter state when the packet is in 'green color'.
1. This is optional. The default is 'disabled'.
2. The resource may be limited such that counter cannot be… | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.25 |
| swEgressAclMeterSrtcmExceedState Specifies the action state when the packet is in 'yellow color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
drop: drop the packet. | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.26 |
| swEgressAclMeterSrtcmExceedReplaceDscp Specifies the DSCP value of the packet when packet is in 'yellow color'.
A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.27 |
| swEgressAclMeterSrtcmExceedCounterState Specifies the counter state when the packet is in 'yellow color'.
1. This is optional. The default is 'disabled'.
2. The resource may be limited such that counter cannot b… | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.28 |
| swEgressAclMeterSrtcmViolateState Specifies the action state when the packet is in 'red color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
drop: drop the packet. | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.29 |
| swEgressAclMeterRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.12.89.4.1.1.3 |
| swEgressAclMeterSrtcmViolateReplaceDscp Specifies the DSCP value of the packet when packet is in 'red color'.
A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.30 |
| swEgressAclMeterSrtcmViolateCounterState Specifies the counter state when the packet is in 'red color'.
1. This is optional. The default is 'diabled'.
2. The resource may be limited so that the counter cannot be … | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.31 |
| swEgressAclMeterMode tr-tcm: two rate three color mode;
sr-tcm: single rate three color mode; | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.4 |
| swEgressAclMeterTrtcmCir Specifies the 'committed information rate' of 'two rate three color mode'.
The unit is Kbps.A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.5 |
| swEgressAclMeterTrtcmCbs Specifies the 'committed burst size' of 'two rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1Kbytes.
2. This parameter is an optional parameter. The defaul… | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.6 |
| swEgressAclMeterTrtcmPir Specifies the 'Peak Information Rate' of 'two rate three color mode'.
The unit is Kbps.A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.7 |
| swEgressAclMeterTrtcmPbs Specifies the 'peak burst size' of 'two rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1kbytes.
2. This parameter is an optional parameter. The default val… | column | Integer32 | .1.3.6.1.4.1.171.12.89.4.1.1.8 |
| swEgressAclMeterTrtcmColorMode Specifies the meter mode.
The default is color-blind mode. The final color of the packet is determined
by the initial color of the packet and the metering result. | column | Enumeration | .1.3.6.1.4.1.171.12.89.4.1.1.9 |