swEgressACLIpv6RuleEnableReplacePriority
EGRESSACL-MIB ·
.1.3.6.1.4.1.171.12.89.3.3.1.20
Object
column
r/w
Enumeration
Specifies if the switch will change priorities of packets that match the access profile 802.1p priority tag or not.
Context
- MIB
- EGRESSACL-MIB
- OID
.1.3.6.1.4.1.171.12.89.3.3.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swEgressACLIpv6RuleEntry
- Table
- swEgressACLIpv6RuleTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swEgressACLIpv6RuleProfileID The ID of the egress ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.1 |
| swEgressACLIpv6RuleType Specifies that the rule applies to the value of ICMP type traffic.
A value of -1 denotes that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.10 |
| swEgressACLIpv6RuleCode Specifies that the rule applies to the value of ICMP code traffic.
A value of -1 denotes that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.11 |
| swEgressACLIpv6RuleSrcPort Specifies that the rule applies to the range of the TCP/UDP source ports.
A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.12 |
| swEgressACLIpv6RuleMaskSrcPort Specifies that the per rule mask of swEgressACLIpv6RuleSrcPort.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this obje… | column | OctetString | .1.3.6.1.4.1.171.12.89.3.3.1.13 |
| swEgressACLIpv6RuleDstPort Specifies the TCP/UDP destination port range.
A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.14 |
| swEgressACLIpv6RuleMaskDstPort Specifies the per rule mask of swEgressACLIpv6RuleDstPort.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object is… | column | OctetString | .1.3.6.1.4.1.171.12.89.3.3.1.15 |
| swEgressACLIpv6RuleVID Specifies this rule only applies to the specified VLAN. There are two conditions:
1.only the portlist that belongs to this VLAN will be included;
2.packets must belong to this VLA… | column | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.171.12.89.3.3.1.16 |
| swEgressACLIpv6RulePort Specifies that the access rule will only apply to the port.
This object and swEgressACLIpv6RuleVID,swEgressACLIpv6RulePortGroup can not be set together.When you set swEgressACLIpv… | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.17 |
| swEgressACLIpv6RulePortGroup Specifies that the access rule will apply only to port(s)which belong to this port group.
This object and swEgressACLIpv6RuleVID,swEgressACLIpv6RulePort can not be set together.
W… | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.18 |
| swEgressACLIpv6RulePermit This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
deny - Specifies that packets matching the access profile
… | column | Enumeration | .1.3.6.1.4.1.171.12.89.3.3.1.19 |
| swEgressACLIpv6RuleAccessID The ID of the the egress ACL rule entry relates to the swEgressACLEtherRuleProfileID.
When row creation is set to 0, this indicates the access ID will be assigned automatically.
W… | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.2 |
| swEgressACLIpv6RuleReplacePriority Specifies the priority will change in packets while the swEgressACLIpv6RuleReplacePriority
is enabled.A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.21 |
| swEgressACLIpv6RuleEnableReplaceDscp Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not. | column | Enumeration | .1.3.6.1.4.1.171.12.89.3.3.1.22 |
| swEgressACLIpv6RuleReplaceDscp Specifies a value to be written to the DSCP field of an outgoing packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in… | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.23 |
| swEgressAclIpv6RuleTimeRangeName Specifies a name of a time-range associated with a specific egress
ACL entry. The time-range name must first be created before being
associated with the access rule. If this name … | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.171.12.89.3.3.1.24 |
| swEgressACLIpv6RuleRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.12.89.3.3.1.3 |
| swEgressACLIpv6RuleClass Specifies that the rule applies to the IPv6 class field.
A value of -1 indicates that this object is not active. | column | Integer32 | .1.3.6.1.4.1.171.12.89.3.3.1.4 |
| swEgressACLIpv6RuleSrcIpv6Addr Specifies that the rule applies to the source IPv6 address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.171.12.89.3.3.1.5 |
| swEgressACLIpv6RuleMaskSrcIpv6Addr Specifies that the per rule mask of swEgressACLIpv6RuleSrcIpv6Addr.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this … | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.171.12.89.3.3.1.6 |
| swEgressACLIpv6RuleDstIpv6Addr Specifies that the rule applies to the destination IPv6 address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.171.12.89.3.3.1.7 |
| swEgressACLIpv6RuleMaskDstIpv6Addr Specifies that the rule applies to the destination IPv6 address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.171.12.89.3.3.1.8 |
| swEgressACLIpv6RuleProtocol Specifies the IPv6 protocol. | column | Enumeration | .1.3.6.1.4.1.171.12.89.3.3.1.9 |