efdmimOscillations

EFDMIM-MIB · .1.3.6.1.4.1.52.1.6.4.1.36
MIB view Table view

Object

scalar mandatory RFC1155-SMICounter 
The number of times the claim/beacon
process has completed since power-up.
Note: This does not get reset when a reset counter 
command is issued.

Context

MIB
EFDMIM-MIB
OID
.1.3.6.1.4.1.52.1.6.4.1.36
Type
scalar
Access
readonly
Status
mandatory
Parent
rev1
Siblings
25

Syntax

RFC1155-SMICounter
Source
RFC1155-SMICounter
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
efdmimRingTable mandatory
An ordered list of fddi nodes found on the Fddi Ring.
table-.1.3.6.1.4.1.52.1.6.4.1.1
efdmimBdgPortTable mandatory
This is a table of items that relate to bridge ports. Note there are 2 bridge (packet communication) ports on the EFDMIM, the ethernet port, and the FDDI port.
table-.1.3.6.1.4.1.52.1.6.4.1.2
efdmimDeviceStatus mandatory
This is an Ascii string representation of the station's status. Responses include 'ON-LINE', 'STAND BY', and 'DISABLED'.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.20
efdmimDeviceBdgName mandatory
This is a user-defined name for the bridge. The name may contain up to 32 characters.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.21
efdmimDeviceType mandatory
This represents the type of bridge this is. The EFDMIM will always respond with 'EFDMIM'.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.22
efdmimDeviceVersion mandatory
A text string representing the firmware version installed in the bridge.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.23
efdmimDeviceLocation mandatory
A user defined name used to represent the location of the bridge.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.24
efdmimDeviceUptime mandatory
The number of seconds that have elapsed since the bridge reset or initialized.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.6.4.1.25
efdmimDeviceDisableBridge mandatory
States whether or not the bridge is disabled. To disable the bridge, set this value to 1. To enable the bridge, set this value to 0.
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.26
efdmimDeviceResetCounters mandatory
This forces the EFDMIM to reset it's counters. Note: The efdmim will reset all it's counters except for the following: FDDI Frame count FDDI Error count FDDI Lost …
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.27
efdmimDeviceSwitchSettings mandatory
This describes the dip and jumper settings physically set on the efdmim board. Switch multiply 2**n Root 0 Forwar…
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.28
efdmimDeviceReceivedPkts mandatory
The aggregate number of frames received by the bridge through it's ports.
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.29
efdmimPhyTable mandatory
This is a table of data that pertains only to phys on the efdmim.
table-.1.3.6.1.4.1.52.1.6.4.1.3
efdmimDeviceFilteredPkts mandatory
The aggregate number of frames received and filtered by the bridge through it's ports.
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.30
efdmimDeviceForwardedPkts mandatory
The aggregate number of frames received and forwarded by the bridge through it's ports.
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.31
efdmimDeviceTransmittedPkts mandatory
The aggregate number of frames transmitted on it's ports.
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.32
efdmimDeviceErrorPkts mandatory
The aggregate number of frame errors detected on it's ports
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.33
efdmimCfmState mandatory
The efdmim's current CFM state. Legal values are: isolated (0) wrap-A (1) wrap-B (2) wrap-AB (3) through-A (4) through-B (5) …
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.34
efdmimBypassAttached mandatory
Does the station has an optical bypass switch?
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.35
efdmimRingUpTime mandatory
The elapsed time in seconds since the most recent ring oscillation. Note: This returns 0 whenever the FDDI ring is down.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.6.4.1.37
efdmimDownstreamMac mandatory
The address of this station's downstream MAC in canonical format.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.38
efdmimBypassStuck mandatory
True if the optical bypass switch is stuck False if everything is ok.
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.39
efdmimMode mandatory
Encapsulation bridges talk using the FDDI ring as a back-bone only. Translation bridges translates the packets into FDDI format.
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.40
efdmimRmtState mandatory
This represents what state the RMT state machine is in. Legal values are: isolated (0) non-Op (1) ring-Op (2) detect (3) non-Op-Dup (4…
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.41
efdmimDeviceBridgeAddr mandatory
This returns the Bridge address in canonical format.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.42