efdmimDeviceUptime
EFDMIM-MIB ·
.1.3.6.1.4.1.52.1.6.4.1.25
Object
The number of seconds that have elapsed since the bridge reset or initialized.
Context
- MIB
- EFDMIM-MIB
- OID
.1.3.6.1.4.1.52.1.6.4.1.25- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- rev1
- Siblings
- 25
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efdmimRingTable mandatory An ordered list of fddi nodes found on the
Fddi Ring. | table | - | .1.3.6.1.4.1.52.1.6.4.1.1 |
| efdmimBdgPortTable mandatory This is a table of items that relate to bridge ports.
Note there are 2 bridge (packet communication) ports
on the EFDMIM, the ethernet port, and the FDDI
port. | table | - | .1.3.6.1.4.1.52.1.6.4.1.2 |
| efdmimDeviceStatus mandatory This is an Ascii string representation of the
station's status. Responses include 'ON-LINE',
'STAND BY', and 'DISABLED'. | scalar | OctetString | .1.3.6.1.4.1.52.1.6.4.1.20 |
| efdmimDeviceBdgName mandatory This is a user-defined name for the bridge. The name
may contain up to 32 characters. | scalar | OctetString | .1.3.6.1.4.1.52.1.6.4.1.21 |
| efdmimDeviceType mandatory This represents the type of bridge this is. The
EFDMIM will always respond with 'EFDMIM'. | scalar | OctetString | .1.3.6.1.4.1.52.1.6.4.1.22 |
| efdmimDeviceVersion mandatory A text string representing the firmware version
installed in the bridge. | scalar | OctetString | .1.3.6.1.4.1.52.1.6.4.1.23 |
| efdmimDeviceLocation mandatory A user defined name used to represent the location of
the bridge. | scalar | OctetString | .1.3.6.1.4.1.52.1.6.4.1.24 |
| efdmimDeviceDisableBridge mandatory States whether or not the bridge is disabled. To
disable the bridge, set this value to 1. To
enable the bridge, set this value to 0. | scalar | Enumeration | .1.3.6.1.4.1.52.1.6.4.1.26 |
| efdmimDeviceResetCounters mandatory This forces the EFDMIM to reset it's counters.
Note: The efdmim will reset all it's counters
except for the following:
FDDI Frame count
FDDI Error count
FDDI Lost … | scalar | Enumeration | .1.3.6.1.4.1.52.1.6.4.1.27 |
| efdmimDeviceSwitchSettings mandatory This describes the dip and jumper settings
physically set on the efdmim board.
Switch multiply 2**n
Root 0
Forwar… | scalar | Integer32 | .1.3.6.1.4.1.52.1.6.4.1.28 |
| efdmimDeviceReceivedPkts mandatory The aggregate number of frames received by the
bridge through it's ports. | scalar | Integer32 | .1.3.6.1.4.1.52.1.6.4.1.29 |
| efdmimPhyTable mandatory This is a table of data that pertains only to phys on
the efdmim. | table | - | .1.3.6.1.4.1.52.1.6.4.1.3 |
| efdmimDeviceFilteredPkts mandatory The aggregate number of frames received and filtered
by the bridge through it's ports. | scalar | Integer32 | .1.3.6.1.4.1.52.1.6.4.1.30 |
| efdmimDeviceForwardedPkts mandatory The aggregate number of frames received and forwarded
by the bridge through it's ports. | scalar | Integer32 | .1.3.6.1.4.1.52.1.6.4.1.31 |
| efdmimDeviceTransmittedPkts mandatory The aggregate number of frames transmitted on it's
ports. | scalar | Integer32 | .1.3.6.1.4.1.52.1.6.4.1.32 |
| efdmimDeviceErrorPkts mandatory The aggregate number of frame errors detected on it's
ports | scalar | Integer32 | .1.3.6.1.4.1.52.1.6.4.1.33 |
| efdmimCfmState mandatory The efdmim's current CFM state.
Legal values are:
isolated (0)
wrap-A (1)
wrap-B (2)
wrap-AB (3)
through-A (4)
through-B (5)
… | scalar | Integer32 | .1.3.6.1.4.1.52.1.6.4.1.34 |
| efdmimBypassAttached mandatory Does the station has an optical bypass switch? | scalar | Enumeration | .1.3.6.1.4.1.52.1.6.4.1.35 |
| efdmimOscillations mandatory The number of times the claim/beacon
process has completed since power-up.
Note: This does not get reset when a reset counter
command is issued. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.6.4.1.36 |
| efdmimRingUpTime mandatory The elapsed time in seconds since the most recent
ring oscillation. Note: This returns 0 whenever the
FDDI ring is down. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.6.4.1.37 |
| efdmimDownstreamMac mandatory The address of this station's downstream MAC in
canonical format. | scalar | OctetString | .1.3.6.1.4.1.52.1.6.4.1.38 |
| efdmimBypassStuck mandatory True if the optical bypass switch is stuck
False if everything is ok. | scalar | Enumeration | .1.3.6.1.4.1.52.1.6.4.1.39 |
| efdmimMode mandatory Encapsulation bridges talk using the FDDI ring as a
back-bone only. Translation bridges translates the
packets into FDDI format. | scalar | Enumeration | .1.3.6.1.4.1.52.1.6.4.1.40 |
| efdmimRmtState mandatory This represents what state the RMT state machine is
in. Legal values are:
isolated (0)
non-Op (1)
ring-Op (2)
detect (3)
non-Op-Dup (4… | scalar | Integer32 | .1.3.6.1.4.1.52.1.6.4.1.41 |
| efdmimDeviceBridgeAddr mandatory This returns the Bridge address in canonical
format. | scalar | OctetString | .1.3.6.1.4.1.52.1.6.4.1.42 |