efdmimDeviceSwitchSettings

EFDMIM-MIB · .1.3.6.1.4.1.52.1.6.4.1.28
MIB view Table view

Object

scalar mandatory Integer32 
This describes the dip and jumper settings 
physically set on the efdmim board.      
          
   Switch               multiply 2**n
     Root                      0
     Forward Broadcasts        1
     Spanning Tree             2
     BPDU Type                 3
     Bypass                    4
     Ring Select               5
     Diagnostics               6
     Mode                      7
                
Root:               If 0, then spanning tree root is 
                  selected.  If 1, then spanning 
                  tree root is NOT selected.
Forward Broadcasts: If 0, then all broadcast packets 
                  are forwarded.  If 1, then all 
                  broadcasts packets are filtered.
Spanning Tree:      If 0, then spanning tree 
                  facilities are enabled. If 1, 
                  then spanning tree facilities 
                  are disabled.
BPDU Type:          If 0, then spanning tree uses 
                  the IEE bridge packet protocol. 
                  If 1, then spanning tree uses 
                  the DEC bridge packet protocol. 
Bypass:             If 0, then there is an optical 
                  bypass physically attached to 
                  the bridge.  If 1, then there is 
                  not an optical bypass attached 
                  to the bridge.
Ring Select:        If 0, the bridge should attach 
                  to the primary FDDI ring 
                  (Through-A mode).  If 1, the 
                  bridge should attach to the 
                  secondary FDDI ring (Through-B 
                  mode). 
Diagnostics:        If 0, the bridge is in it's 
                  normal mode of operation. If 1, 
                  then the bridge is running self 
                  diagnostics. 
Mode:               If 0, the bridge is an 
                  encapsulating bridge (talks from 
                  ethernet to ethernet using FDDI 
                  only as a backbone). If 1, the 
                  bridge is a translation bridge ( 
                  talks ethernet to ethernet, and 
                  ethernet to FDDI).

Context

MIB
EFDMIM-MIB
OID
.1.3.6.1.4.1.52.1.6.4.1.28
Type
scalar
Access
readonly
Status
mandatory
Parent
rev1
Siblings
25

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
efdmimRingTable mandatory
An ordered list of fddi nodes found on the Fddi Ring.
table-.1.3.6.1.4.1.52.1.6.4.1.1
efdmimBdgPortTable mandatory
This is a table of items that relate to bridge ports. Note there are 2 bridge (packet communication) ports on the EFDMIM, the ethernet port, and the FDDI port.
table-.1.3.6.1.4.1.52.1.6.4.1.2
efdmimDeviceStatus mandatory
This is an Ascii string representation of the station's status. Responses include 'ON-LINE', 'STAND BY', and 'DISABLED'.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.20
efdmimDeviceBdgName mandatory
This is a user-defined name for the bridge. The name may contain up to 32 characters.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.21
efdmimDeviceType mandatory
This represents the type of bridge this is. The EFDMIM will always respond with 'EFDMIM'.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.22
efdmimDeviceVersion mandatory
A text string representing the firmware version installed in the bridge.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.23
efdmimDeviceLocation mandatory
A user defined name used to represent the location of the bridge.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.24
efdmimDeviceUptime mandatory
The number of seconds that have elapsed since the bridge reset or initialized.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.6.4.1.25
efdmimDeviceDisableBridge mandatory
States whether or not the bridge is disabled. To disable the bridge, set this value to 1. To enable the bridge, set this value to 0.
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.26
efdmimDeviceResetCounters mandatory
This forces the EFDMIM to reset it's counters. Note: The efdmim will reset all it's counters except for the following: FDDI Frame count FDDI Error count FDDI Lost …
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.27
efdmimDeviceReceivedPkts mandatory
The aggregate number of frames received by the bridge through it's ports.
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.29
efdmimPhyTable mandatory
This is a table of data that pertains only to phys on the efdmim.
table-.1.3.6.1.4.1.52.1.6.4.1.3
efdmimDeviceFilteredPkts mandatory
The aggregate number of frames received and filtered by the bridge through it's ports.
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.30
efdmimDeviceForwardedPkts mandatory
The aggregate number of frames received and forwarded by the bridge through it's ports.
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.31
efdmimDeviceTransmittedPkts mandatory
The aggregate number of frames transmitted on it's ports.
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.32
efdmimDeviceErrorPkts mandatory
The aggregate number of frame errors detected on it's ports
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.33
efdmimCfmState mandatory
The efdmim's current CFM state. Legal values are: isolated (0) wrap-A (1) wrap-B (2) wrap-AB (3) through-A (4) through-B (5) …
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.34
efdmimBypassAttached mandatory
Does the station has an optical bypass switch?
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.35
efdmimOscillations mandatory
The number of times the claim/beacon process has completed since power-up. Note: This does not get reset when a reset counter command is issued.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.6.4.1.36
efdmimRingUpTime mandatory
The elapsed time in seconds since the most recent ring oscillation. Note: This returns 0 whenever the FDDI ring is down.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.6.4.1.37
efdmimDownstreamMac mandatory
The address of this station's downstream MAC in canonical format.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.38
efdmimBypassStuck mandatory
True if the optical bypass switch is stuck False if everything is ok.
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.39
efdmimMode mandatory
Encapsulation bridges talk using the FDDI ring as a back-bone only. Translation bridges translates the packets into FDDI format.
scalarEnumeration.1.3.6.1.4.1.52.1.6.4.1.40
efdmimRmtState mandatory
This represents what state the RMT state machine is in. Legal values are: isolated (0) non-Op (1) ring-Op (2) detect (3) non-Op-Dup (4…
scalarInteger32.1.3.6.1.4.1.52.1.6.4.1.41
efdmimDeviceBridgeAddr mandatory
This returns the Bridge address in canonical format.
scalarOctetString.1.3.6.1.4.1.52.1.6.4.1.42