rlAAAPasswordGlobalAgingTime
EDGECORE-AAA ·
.1.3.6.1.4.1.259.10.1.14.89.79.67
Object
scalar
r/w
Integer32
Determines whether password aging should be applied.
Tic doesn't have to be enabled.
If == 0 then aging is disabled.
Note: Actual aging will not be enabled if system
doesn't have real time clock until, clock is
set either by user or SNTP.
Context
- MIB
- EDGECORE-AAA
- OID
.1.3.6.1.4.1.259.10.1.14.89.79.67- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rlAAA
- Siblings
- 63
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlAAAMibVersion MIB's version, the current version is 3. The difference in rlAAACreationDateSystemPasswordLevel15 and
rlAAALocalUserEntry. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.14.89.79.1 |
| rlAAATacacsSupported This mib show whether Tacacs+ is supported in AAA. If the
value is false Tacacs+ will not be used as an
authentication and accounting method. If the value
is true Taca… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.10 |
| rlAAALocalUserSupported This mib show whether the local users db is supported in
AAA.If the value is false the local users db will not be
used as an authentication and accounting method. If the
value is … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.11 |
| rlAAASystemPasswordSupported This mib show whether system password is supported in AAA.
If the value is false system password will not be used as
an authentication and accounting method. If the value is
true … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.12 |
| rlAAALinePasswordSupported This mib show whether line password is supported in AAA.
If the value is false line password will not be used as an
authentication and accounting method. If the value is true
the … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.13 |
| rlAAALineAlwaysSuccessSupported This mib show whether line always success method is
supported in AAA.If the value is false always success
method will not be used as an authentication and
accounting method. If th… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.14 |
| rlAAAMethodListTable The table specifies all methods list per method name. | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.15 |
| rlAAALineTable The table specifies all lines, their passwords and their
authorizations level .the table ordered lexicography by
the line name. when a new line is being authenticate the
search in… | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.16 |
| rlAAALocalUserTable The table specifies all usernames, their passwords and
their authorizations. | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.17 |
| rlAAASystemPasswordlevel1 system Password for level 1.
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex… | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.18 |
| rlAAASystemPasswordlevel2 system Password for level 2
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex … | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.19 |
| rlAAARetries Determines the number of retries for each method
(Radius, local passwords, local users table and
tacacs). | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.14.89.79.2 |
| rlAAASystemPasswordlevel3 system Password for level 3
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex … | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.20 |
| rlAAASystemPasswordlevel4 system Password for level 4
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex … | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.21 |
| rlAAASystemPasswordlevel5 system Password for level 5
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex … | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.22 |
| rlAAASystemPasswordlevel6 system Password for level 6
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex … | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.23 |
| rlAAASystemPasswordlevel7 system Password for level 7
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex … | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.24 |
| rlAAASystemPasswordlevel8 system Password for level 8
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex … | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.25 |
| rlAAASystemPasswordlevel9 system Password for level 9
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex … | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.26 |
| rlAAASystemPasswordlevel10 system Password for level 10
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex… | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.27 |
| rlAAASystemPasswordlevel11 system Password for level 11
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex… | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.28 |
| rlAAASystemPasswordlevel12 system Password for level 12
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex… | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.29 |
| rlAAARadiusEnabled Specifies whether AAA will use Radius. When to use
Radius exactly depends on its position in the
methods list. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.3 |
| rlAAASystemPasswordlevel13 system Password for level 13
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex… | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.30 |
| rlAAASystemPasswordlevel14 system Password for level 14
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex… | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.31 |
| rlAAASystemPasswordlevel15 system Password for level 15
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex… | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.32 |
| rlAAAUserTable The table holds all current users that have been authenticated. | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.33 |
| rlAAATest | node | - | .1.3.6.1.4.1.259.10.1.14.89.79.34 |
| rlAAATacacsEnabled Specifies whether AAA will use Tacacs. When to use
Tacacs exactly depends on its position in the
methods list. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.4 |
| rlTacacs | node | - | .1.3.6.1.4.1.259.10.1.14.89.79.40 |
| rlAAAAuditingEnable Controls whether SysLog messages
should be issued on login events | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.41 |
| rlAAAMinPasswordLength The minimum length of password for local user authentication
defined in field rlAAALocalUserPassword in rlAAALocalUserTable.
The value applies only to new or updated user password… | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.14.89.79.42 |
| rlAAAPasswordHistSize The number of most recent password,
previously defined for Local User Table, Line Table,
System Password Table for specific entity.
This list used for password reusing prevention.… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.259.10.1.14.89.79.43 |
| rlAAAPasswordHistHoldTime The time in day, which an old password
may be used in password history check.
Changing the value does not cause the
loss of history. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.259.10.1.14.89.79.44 |
| rlAAASuccLoginWriteToFile Controls whether successful logins are
written to login file | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.45 |
| rlAAALocalLoginHistTable The table holds successful login history
for all users. This table is read-only. | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.46 |
| rlAAALinePassLoginHistTable The table holds successful login history
for Line passwords. This table is read-only. | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.47 |
| rlAAASystemLoginHistTable The table holds successful login history
for system passwords. This table is read-only. | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.48 |
| rlAAASysPassStatTable The table specifies all system password and
their security properties: is password locked
due to wrong password, when and how it was locked
or last unsuccessful login information,… | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.49 |
| rlAAALocalUserEnabled Specifies whether AAA will use the local users table.
When to use the table exactly depends on its
position in the methods list. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.5 |
| rlAAAMaxNumLogAttmpts The number of consecutive unsuccessful login attempts
before user is locked. Value of 0 means no limit. The actual range is
product specific. TIC requirement is 3. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.14.89.79.50 |
| rlAAAUnlockUserName An action MIB variable setting with value
of Local User Name will unlock this user.
The value of this variable is not saved to
non volatile storage. Read of this variable
always r… | scalar | OctetString | .1.3.6.1.4.1.259.10.1.14.89.79.51 |
| rlAAAUnlockSystemPassword An action MIB variable setting with value
of Level will unlock the system password
for this level. The value of this variable
is not saved to non volatile storage.
Read of this va… | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.14.89.79.52 |
| rlAAALockedLineTable The table specifies lines statuses.
Users cannot access the product from
remote based on a password of the locked line.
This table enables to unlock lines. | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.53 |
| rlAAASystemPasswordVerificationAndSettingTable The table specifies per every system level, old and new passwords.
Serves for verification the old password and setting a new password. | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.54 |
| rlAAAAccountingMngMethod Method, used for accounting of management sessions,
none denotes Accounting is disabled. | scalar | RlAAAAccountingMethod | .1.3.6.1.4.1.259.10.1.14.89.79.55 |
| rlAAAAccountingDot1xMethod Method, used for accounting of 802.1x sessions,
none denotes Accounting is disabled. | scalar | RlAAAAccountingMethod | .1.3.6.1.4.1.259.10.1.14.89.79.56 |
| rlAAAUserInetTable The table holds all current users that have been authenticated.
it coexist with rlAAAUserTable to support IPv4 and IPv6 | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.57 |
| rlAAALocalLoginHistInetTable The table holds successful login history
for all users. This table is read-only.
it coexist with rlAAALocalLoginHistTable to support IPv4 and IPv6 | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.58 |
| rlAAALinePassLoginHistInetTable The table holds successful login history
for Line passwords. This table is read-only.
it coexist with rlAAALinePassLoginHistTable to support IPv4 and IPv6 | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.59 |
| rlAAASystemPasswordEnabled Specifies whether AAA will use the system password.
When to use the passwords exactly depends on its
position in the methods list. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.6 |
| rlAAASystemLoginHistInetTable The table holds successful login history
for system passwords. This table is read-only.
it coexist with rlAAASystemLoginHistTable to support IPv4 and IPv6 | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.60 |
| rlAAAPasswordComplexityEnabled Specifies whether password complexity rules
must be applied. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.61 |
| rlAAAPasswordComplexityMinCharClasses Indicates minimal number of character classes
from which the password should contain characters
if password complexity enabled.
charater classes are : lower case, upper case,
digi… | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.14.89.79.62 |
| rlAAAPasswordComplexityNotOldPasswordEnabled Specifies whether new password can be as
same as old password if password complexity enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.63 |
| rlAAAPasswordComplexityCharRepeat Indicates that no character in new password can't be
repeated more than 3 times if password complexity enabled. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.14.89.79.64 |
| rlAAAPasswordComplexityNotUserNameEnabled Specifies whether new password can be as
same as user name if password complexity enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.65 |
| rlAAAPasswordComplexityNotManufacturerEnabled Specifies whether new password can be as
same as manufacturer name if password complexity enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.66 |
| rlAAALocalUserPasswordVerificationAndSettingTable The table specifies per every local user, old and new passwords.
Serves for verification the old password and setting a new password. | table | - | .1.3.6.1.4.1.259.10.1.14.89.79.68 |
| rlAAACreationDateSystemPasswordLevel15 The date on which the system Password for level 15 was created.
Otherwise zero size string | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.259.10.1.14.89.79.69 |
| rlAAALinePasswordEnabled Specifies whether AAA will use the line password.
When to use the passwords exactly depends on its
position in the methods list. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.7 |
| rlAAAAlwaysSuccessEnabled Specifies whether AAA will use the always success method.
When to use that method exactly depends on its
position in the methods list. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.8 |
| rlAAARadiusSupported This mib show whether Radius is supported in AAA. If the
value is false Radius will not be used as an
authentication and accounting method. If the value
is true Radius will be use… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.14.89.79.9 |