staPortAdminEdgePortWithAuto

ECS5520-MIB · .1.3.6.1.4.1.259.10.1.51.1.5.2.1.16
MIB view Table view

Object

column r/w Enumeration 
The administrative value of the edge port parameter.
A value of enable(1) indicates that this port should be
assumed as an edge-port, a value of disable(2) indicates
that this port should be assumed as a non-edge-port and
a value of auot (3) indicates this port in RSPT or MSTP mode
should be assumed as an edge-port after migration or max age expire
without receiving any BPDU and sending BPDU with proposal flag on.

Context

MIB
ECS5520-MIB
OID
.1.3.6.1.4.1.259.10.1.51.1.5.2.1.16
Type
column
Access
readwrite
Status
current
Parent
staPortEntry
Table
staPortTable
Siblings
14

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
staPortLongAdminPathCost
The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which inc…
columnInteger32.1.3.6.1.4.1.259.10.1.51.1.5.2.1.10
staPortLongOperPathCost
The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which incl…
columnInteger32.1.3.6.1.4.1.259.10.1.51.1.5.2.1.11
staPortBpduFlooding
This parameter is used to configure the capability of BPDUs flooding.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.51.1.5.2.1.12
staPortBpduGuard
A value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.51.1.5.2.1.15
staPortBpduFilter
The administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value of disabled(2) indic…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.51.1.5.2.1.17
staPortRootGuardStatus
Specifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.51.1.5.2.1.18
staPortBpduGuardAutoRecovery
A value of enabled(1) indicates that BPDU port guard auto recovery mechanism is enabled for this port. A value of disabled(2) indicates that the mechanism is disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.51.1.5.2.1.19
staPortBpduGuardAutoRecoveryInterval
The interval in seconds used by BPDU guard auto recovery mechanism.
columnUnsigned32.1.3.6.1.4.1.259.10.1.51.1.5.2.1.20
staPortTcPropStop
Stop topology change progate on this ifindex. Don't enable on potentially ring port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.51.1.5.2.1.21
staPortProtocolMigration
When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always ret…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.51.1.5.2.1.3
staPortOperEdgePort
The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.51.1.5.2.1.5
staPortAdminPointToPoint
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected…
columnEnumeration.1.3.6.1.4.1.259.10.1.51.1.5.2.1.6
staPortOperPointToPoint
The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value i…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.51.1.5.2.1.7
staPortSystemStatus
Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.51.1.5.2.1.9