staPortTcPropStop
ECS4510-MIB ·
.1.3.6.1.4.1.259.10.1.24.1.5.2.1.21
Object
Stop topology change propogate on this ifindex. Don't enable on potential ring port.
Context
- MIB
- ECS4510-MIB
- OID
.1.3.6.1.4.1.259.10.1.24.1.5.2.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- staPortEntry
- Table
- staPortTable
- Siblings
- 14
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| staPortLongAdminPathCost The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
inc… | column | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.10 |
| staPortLongOperPathCost The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
incl… | column | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.11 |
| staPortBpduFlooding This parameter is used to configure the capability of BPDU
flooding. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.12 |
| staPortBpduGuard A value of enabled(1) indicates that BPDU port guard feature
is enabled for each port. A value of disabled(2) indicates
that the feature is disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.15 |
| staPortAdminEdgePortWithAuto The administrative value of the edge port parameter.
A value of enable(1) indicates that this port should be
assumed as an edge-port, a value of disable(2) indicates
that this por… | column | Enumeration | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.16 |
| staPortBpduFilter The administrative value of the BPDU filter parameter.
A value of enabled(1) indicates that this port will avoid
transmitting BPDUs on edge-port and the value of disabled(2)
indic… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.17 |
| staPortRootGuardStatus Specifies the desired status of root guard. This variable
configures the root guard feature to enforce the root bridge
placement in the network. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.18 |
| staPortBpduGuardAutoRecovery A value of enabled(1) indicates that BPDU port guard auto
recovery mechanism is enabled for this port. A value of
disabled(2) indicates that the mechanism is disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.19 |
| staPortBpduGuardAutoRecoveryInterval The interval in seconds used by BPDU guard auto recovery
mechanism. | column | Unsigned32 | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.20 |
| staPortProtocolMigration When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always ret… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.3 |
| staPortOperEdgePort The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.5 |
| staPortAdminPointToPoint The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected… | column | Enumeration | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.6 |
| staPortOperPointToPoint The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.7 |
| staPortSystemStatus Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.5.2.1.9 |