ospfMultiProcessIfHelloInterval
ECS4510-MIB ·
.1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.10
Object
column
r/w
seconds Integer32
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. This is a private substitution for ospfIfHelloInterval of RFC1253.
Context
- MIB
- ECS4510-MIB
- OID
.1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- ospfMultiProcessIfEntry
- Table
- ospfMultiProcessIfTable
- Siblings
- 19
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfMultiProcessIfIpAddressType The IP address type of this OSPF interface. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.1 |
| ospfMultiProcessIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen
before its neighbors declare the router down.
This should be some multiple of the Hello interval. This value… | column | seconds Integer32 | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.11 |
| ospfMultiProcessIfState The OSPF Interface State.
This is a private substitution for ospfIfState of RFC1253. | column | Enumeration | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.12 |
| ospfMultiProcessIfDesignatedRouter The IP address of the designated router.
This is a private substitution for ospfIfDesignatedRouter of RFC1253. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.13 |
| ospfMultiProcessIfBackupDesignatedRouter The IP address of the backup designated router.
This is a private substitution for ospfIfBackupDesignatedRouter of
RFC1253. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.14 |
| ospfMultiProcessIfEvents The number of times this OSPF interface has changed its state or an
error has occurred.
Discontinuities in the value of this counter can occur at
re-initialization … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.15 |
| ospfMultiProcessIfAuthKey The cleartext password used as an OSPF authentication key when
simplePassword security is enabled. This object does not access any
OSPF cryptogaphic (e.g., MD5) authentication ke… | column | OctetString | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.16 |
| ospfMultiProcessIfStatus This variable displays the status of the ospf interface.
Currently only active and notInService statuses are supported.
The value of this object has no effect on wh… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.17 |
| ospfMultiProcessIfAuthType The authentication type specified for an interface.
Note that this object can be used to engage in significant attacks
against an OSPF router.
This is a private sub… | column | OspfAuthenticationType | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.18 |
| ospfMultiProcessIfDesignatedRouterId The Router ID of the designated router.
This is a private substitution for ospfIfDesignatedRouterId of
RFC4750. | column | RouterID | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.19 |
| ospfMultiProcessIfIpAddress The IP address of this OSPF interface. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.2 |
| ospfMultiProcessIfBackupDesignatedRouterId The Router ID of the backup designated router.
This is a private substitution for ospfIfBackupDesignatedRouterId
of RFC4750. | column | RouterID | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.20 |
| ospfMultiProcessIfCost The output cost of this OSPF interface.
Set 0 means unset the cost, thus the cost is dependent on
ospfMultiProcessAutoCost. | column | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.3 |
| ospfMultiProcessIfMtu The mtu of this OSPF interface. Set 0 to unset the mtu. | column | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.4 |
| ospfMultiProcessIfMtuIgnore If check(0), OSPF will check the MTU size during DD (Database
Description) exchange.
If ignore(1), OSPF will not check the MTU size during DD exchange. | column | Enumeration | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.5 |
| ospfMultiProcessIfAreaId A 32-bit integer uniquely identifying the area to which the interface
connects. Area ID 0.0.0.0 is used for the OSPF backbone.
This is a private substitution for ospfIfAreaId of … | column | AreaID | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.6 |
| ospfMultiProcessIfRtrPriority The priority of this interface. Used in multi-access networks, this
field is used in the designated router election algorithm. The value 0
signifies that the router is not eligib… | column | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.7 |
| ospfMultiProcessIfTransitDelay The estimated number of seconds it takes to transmit a link state
update packet over this interface. Note that the minimal value SHOULD
be 1 second.
This is a private substitutio… | column | seconds Integer32 | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.8 |
| ospfMultiProcessIfRetransInterval The number of seconds between link state advertisement
retransmissions, for adjacencies belonging to this interface. This
value is also used when retransmitting database descripti… | column | seconds Integer32 | .1.3.6.1.4.1.259.10.1.24.1.18.3.14.1.9 |