mldSnoopProfileCtl
ECS4510-MIB ·
.1.3.6.1.4.1.259.10.1.24.1.54.19
Object
node
No description available.
Context
- MIB
- ECS4510-MIB
- OID
.1.3.6.1.4.1.259.10.1.24.1.54.19- Type
- node
- Parent
- mldSnoopMgt
- Siblings
- 23
- Children
- 5
Syntax
No syntax metadata recorded.
Values & Constraints
Object Constraints
range: 1-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mldSnoopStatus Parameter to enable or disable MLD snooping on the device.
When enabled, the device will examine MLD packets and set
up filters for MLD ports. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.54.1 |
| mldSnoopRouterStaticTable Table for static router ports. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.10 |
| mldSnoopMulticastCurrentTable Table for current multicast addresses. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.11 |
| mldSnoopMulticastStaticTable Table for static multicast addresses. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.12 |
| mldSnoopCurrentVlanTable Table for configuring MLD snooping for each VLAN
which exists in the device by (local or network)
management, or dynamically created as a result of
GVRP requests received. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.13 |
| mldSnoopProxyReporting Parameter to enable or disable MLD snooping proxy reporting
on the device. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.54.14 |
| mldSnoopUnsolicitedReportInterval Setting this value to specify how long (in seconds) the
uplink ports should transmit unsolicited reports. | scalar | Unsigned32 | .1.3.6.1.4.1.259.10.1.24.1.54.15 |
| mldSnoopPortTable Table of MLD Snooping service per port. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.16 |
| mldSnoopFilterStatus Parameter to enable or disable MLD filtering on the device. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.54.17 |
| mldSnoopProfileTable The table for configuring the MLD snooping profile. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.18 |
| mldSnoopQuerier Enables (disables) whether the switch acts as an MLD
querier. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.24.1.54.2 |
| mldSnoopProfileRangeTable The table for configuring the range of the MLD snooping
profile. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.20 |
| mldSnoopFilterPortTable Table for port configuration in MLD filtering. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.21 |
| mldSnoopThrottlePortTable Table for port configuration in MLD throttling. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.22 |
| mldSnoopClearDynamicGroups The current number of MLD groups that the interface has joined. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.24.1.54.23 |
| mldSnoopVlanTable Table of MLD Snooping service per port. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.24 |
| mldSnoopRobustness The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Ro… | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.54.3 |
| mldSnoopQueryInterval The interval (in seconds) between MLD host-query
messages sent by the switch. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.54.4 |
| mldSnoopQueryMaxResponseTime The time after a query, during which a response is
expected from an endstation. If a querier has sent
a number of queries defined by mldSnoopRobustness,
but an endstation has not … | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.54.5 |
| mldSnoopRouterPortExpireTime Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.54.6 |
| mldSnoopVersion MLD version snooped | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.24.1.54.7 |
| mldSnoopUnknownMcastMode Sets the mldSnoopUnknownMcastMode to define the flooding
behavior when receiving unknown multicast traffic. | scalar | Enumeration | .1.3.6.1.4.1.259.10.1.24.1.54.8 |
| mldSnoopRouterCurrentTable Table for current router ports. | table | - | .1.3.6.1.4.1.259.10.1.24.1.54.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mldSnoopProfileCtlId The ID of the MLD snooping profile. The default value
is zero, meaning that no ID is specified. In order to
create a profile, a non-zero value must be specified. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.259.10.1.24.1.54.19.1 |
| mldSnoopProfileCtlInetAddressType The address type associated with this agent.
Only ipv4(1) type is supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.259.10.1.24.1.54.19.2 |
| mldSnoopProfileCtlStartInetAddress The specified addresses in the start of the controlled
IP multicast addresses. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.259.10.1.24.1.54.19.3 |
| mldSnoopProfileCtlEndInetAddress The specified addresses in the end of the controlled
IP multicast addresses. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.259.10.1.24.1.54.19.4 |
| mldSnoopProfileCtlAction Setting it to create(2) creates the range of the
controlled IP multicast addresses.
Setting it to destroy(3) destroys the range of the
controlled IP multicast addresses.
When the … | scalar | Enumeration | .1.3.6.1.4.1.259.10.1.24.1.54.19.5 |