mldSnoopUnknownMcastMode
ECS4210-MIB ·
.1.3.6.1.4.1.259.10.1.42.101.1.54.8
Object
scalar
r/w
Enumeration
Sets the mldSnoopUnknownMcastMode to define the flooding behavior when receive the unknown multicast traffic.
Context
- MIB
- ECS4210-MIB
- OID
.1.3.6.1.4.1.259.10.1.42.101.1.54.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- mldSnoopMgt
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | flood |
2 | toRouterPort |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mldSnoopStatus Parameter to enable or disable MLD snooping on the device.
When enabled, the device will examine MLD packets and set
up filters for MLD ports. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.42.101.1.54.1 |
| mldSnoopRouterStaticTable Table for static router ports. | table | - | .1.3.6.1.4.1.259.10.1.42.101.1.54.10 |
| mldSnoopMulticastCurrentTable Table for current multicast addresses. | table | - | .1.3.6.1.4.1.259.10.1.42.101.1.54.11 |
| mldSnoopMulticastStaticTable Table for static multicast addresses. | table | - | .1.3.6.1.4.1.259.10.1.42.101.1.54.12 |
| mldSnoopCurrentVlanTable Table for configuring MLD snooping for each VLAN
which exists in the device by (local or network)
management, or dynamically created as a result of
GVRP requests received. | table | - | .1.3.6.1.4.1.259.10.1.42.101.1.54.13 |
| mldSnoopQuerier Enables (disables) whether the switch acts as an MLD
querier. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.42.101.1.54.2 |
| mldSnoopRobustness The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Ro… | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.42.101.1.54.3 |
| mldSnoopQueryInterval The interval (in seconds) between MLD host-query
messages sent by the switch. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.42.101.1.54.4 |
| mldSnoopQueryMaxResponseTime The time after a query, during which a response is
expected from an endstation. If a querier has sent
a number of queries defined by mldSnoopRobustness,
but an endstation has not … | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.42.101.1.54.5 |
| mldSnoopRouterPortExpireTime Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.42.101.1.54.6 |
| mldSnoopVersion MLD version snooped | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.42.101.1.54.7 |
| mldSnoopRouterCurrentTable Table for current router ports. | table | - | .1.3.6.1.4.1.259.10.1.42.101.1.54.9 |