ospfMultiProcessVirtIfAuthKey
ECS3610-MIB ·
.1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.9
Object
column
r/w
OctetString
The cleartext password used as an OSPF authentication key when
simplePassword security is enabled. This object does not access any
OSPF cryptogaphic (e.g., MD5) authentication key under any
circumstance.
If the key length is shorter than 8 octets, the agent will left adjust
and zero fill to 8 octets.
Unauthenticated interfaces need no authentication key, and simple
password authentication cannot use a key of more than 8 octets.
Note that the use of simplePassword authentication is NOT recommended
when there is concern regarding attack upon the OSPF system.
SimplePassword authentication is only sufficient to protect against
accidental misconfigurations because it re-uses cleartext passwords.
[RFC1704]
When read, ospfVirtIfAuthKey always returns an octet string of length
zero.
Context
- MIB
- ECS3610-MIB
- OID
.1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ospfMultiProcessVirtIfEntry
- Table
- ospfMultiProcessVirtIfTable
- Siblings
- 10
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfMultiProcessVirtIfAreaId The transit area that the virtual link traverses. By definition, this
is not 0.0.0.0. | column | AreaID | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.1 |
| ospfMultiProcessVirtIfStatus This object permits management of the table by facilitating actions
such as row creation, construction, and destruction.
The value of this object has no effect on w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.10 |
| ospfMultiProcessVirtIfAuthType The authentication type specified for a virtual interface.
Note that this object can be used to engage in significant attacks
against an OSPF router. | column | OspfAuthenticationType | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.11 |
| ospfMultiProcessVirtIfNeighbor The Router ID of the virtual neighbor. | column | RouterID | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.2 |
| ospfMultiProcessVirtIfTransitDelay The estimated number of seconds it takes to transmit a Link State
update packet over this interface. Note that the minimal value SHOULD
be 1 second. | column | seconds Integer32 | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.3 |
| ospfMultiProcessVirtIfRetransInterval The number of seconds between link state avertisement retransmissions,
for adjacencies belonging to this interface. This value is also used
when retransmitting database descripti… | column | seconds Integer32 | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.4 |
| ospfMultiProcessVirtIfHelloInterval The length of time, in seconds, between the Hello packets that the
router sends on the interface. This value must be the same for the
virtual neighbor. | column | seconds Integer32 | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.5 |
| ospfMultiProcessVirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen
before its neighbors declare the router down. This should be 4
multiple of the Hello interval. This value … | column | seconds Integer32 | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.6 |
| ospfMultiProcessVirtIfState OSPF virtual interface states. | column | Enumeration | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.7 |
| ospfMultiProcessVirtIfEvents The number of state changes or error events on this virtual link.
Discontinuities in the value of this counter can occur at
re-initialization of the management syst… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.259.10.1.6.1.18.3.20.1.8 |