ds3IDLEDetected
ECI-TRAPS ·
.1.3.6.1.4.1.5395.4.1.3.0.5
Object
notification
This trap indicates that the specified DS3/E3 channel is experiencing an IDLE signal. An IDLE signal indicates that a fixed pattern coded signal placed on the DS3/E3 channel when no input data signal is assigned to this channel. This trap has been declared when the IDLE signal persists for 2 to 10 seconds.
Context
- MIB
- ECI-TRAPS
- OID
.1.3.6.1.4.1.5395.4.1.3.0.5- Type
- notification
- Status
- current
- Parent
- eciDs3TrapsZero
- Siblings
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ds3AISDetected This trap indicates that the specified DS3/E3 channel
is receiving an Alarm Indication Signal (AIS) from
the far-end equipment. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.1 |
| ds3FacilityLoopbackCleared This trap indicates that Facility loopback (also known
as Remote loopback) is cleared on the specified ds3
interface. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.10 |
| ds3TerminalLoopbackConfigured This trap indicates that Terminal loopback (also known
as local loopback) is configured on the specified ds3
interface. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.11 |
| ds3TerminalLoopbackCleared This trap indicates that Terminal loopback (also known
as local loopback) is cleared on the specified ds3
interface. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.12 |
| ds3REDDetected This trap indicates that the specified DS3/E3 channel is
experiencing a RED condition. An RED indication signals
that the DS3/E3 frame alignment acquisition circuitry has
been out… | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.13 |
| ds3REDCleared This trap indicates that the RED condition identified
by trap ds3REDDetected has been cleared. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.14 |
| ds3LOSDetected This trap indicates that the specified DS3/E3 channel is
experiencing a LOS condition. An LOS indication signals
that the DS3/E3 has experienced loss of signal. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.15 |
| ds3LOSCleared This trap indicates that the LOS condition identified
by trap ds3LOSDetected has been cleared. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.16 |
| ds3AISCleared This trap indicates that the Alarm Inidication Signal
(AIS) condition identified by trap ds3AISDetected has
been cleared. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.2 |
| ds3OOFDetected This trap indicates that the specified DS3/E3 channel is
experiencing an Out of Frame (OOF). An OOF defect is
detected when 3 or more errors in 16 or fewer consecutive
F-bits occu… | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.3 |
| ds3OOFCleared This trap indicates that the Out of Frame (OOF) condition
identified by trap ds3OOFDetected has been cleared. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.4 |
| ds3IDLECleared This trap indicates that the IDLE condition identified
by trap ds3IDLEDetected has been cleared. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.6 |
| ds3RDIDetected This trap indicates that the specified DS3/E3 channel is
experiencing a Remote Defect Indication (RDI). An RDI
is also referred as a YELLOW signal, a Remote Alarm
Indication (RAI… | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.7 |
| ds3RDICleared This trap indicates that the Remote Defect Indication
(RDI) condition identified by trap ds3RDIDetected has
been cleared. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.8 |
| ds3FacilityLoopbackConfigured This trap indicates that Facility loopback (also known
as Remote loopback) is configured on the specified ds3
interface. | notification | - | .1.3.6.1.4.1.5395.4.1.3.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| IF-MIBifName The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in commands
entered… | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.31.1.1.1.1 |