dvbRcsSystemLocation
DVB-RCS-MIB ·
.1.3.6.1.2.1.10.239.1.1.1.5
Object
Physical location of the ODU antenna expressed as
longitude, latitude, and altitude. The string
shall have 31 characters in the following format:
<xxxx.xxx>,<a>,<yyyyy.yyy>,<b>,<zzzz.z>,M
where x, y and z represents digits,
a=N or S,
b=E or W,
Reading the digits from left to right:
'x' 7 latitude digits;
x digits 1-2 contain the degrees,
x digits 3-7 contain the minutes in decimal;
'y' 8 longitude digits;
y digits 1-3 contain the degrees,
y digits 4-8 contain the minutes in decimal;
'z' 5 altitude digits;
meters above sea level in decimal;
'.' is the decimal point;
',' is the field separator;
'M' is the indicator for altitude meters.
This format is a modified subset of the NMEA 0183
(National Marine Electronics Association, Interface
Standard) format for Global Positioning System Fix
Data.
This location and the satellite position are used to
calculate the RCST-satellite path delay.
Note: The system.sysLocation object of MIB-II provides
physical location of the IDU unit.
Context
- MIB
- DVB-RCS-MIB
- OID
.1.3.6.1.2.1.10.239.1.1.1.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- dvbRcsRcstSystem
- Siblings
- 16
Syntax
SNMP-FRAMEWORK-MIBSnmpAdminString
- Source
- SNMP-FRAMEWORK-MIBSnmpAdminString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dvbRcsSystemMibRevision This object allows the SNMP agent to report the
implemented MIB module revision.
The supported REVISION of this module is reported. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.10.239.1.1.1.1 |
| dvbRcsSystemOduRxType Type of LNB installed in the ODU, with
information such as vendor type, output type (single,
twin, quad,...), etc. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.10.239.1.1.1.10 |
| dvbRcsSystemOduRxBand LNB High Band / Low Band selector. High Band corresponds
to the emission of an 18-26 kHz tone with 0.4-0.8 Vpp in
the Rx IFL cable:
(0) - High Band
(1) - Low Band | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.1.11 |
| dvbRcsSystemOduRxLO Frequency of LNB Local Oscillator (in 100 Hz) | scalar | x100 Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.1.12 |
| dvbRcsSystemOduTxLO Frequency of Block Up-Converter Local Oscillator
(in 100 Hz). | scalar | x100 Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.1.13 |
| dvbRcsSystemIduPep | node | - | .1.3.6.1.2.1.10.239.1.1.1.14 |
| dvbRcsOduTx | node | - | .1.3.6.1.2.1.10.239.1.1.1.15 |
| dvbRcsOduRx | node | - | .1.3.6.1.2.1.10.239.1.1.1.16 |
| dvbRcsOduAntenna | node | - | .1.3.6.1.2.1.10.239.1.1.1.17 |
| dvbRcsSystemSatLabsProfilesDeclaration Indicates the SatLabs profiles supported, as defined in
the SatLabs System Recommendations. | scalar | DvbRcsSatLabsProfileMap | .1.3.6.1.2.1.10.239.1.1.1.2 |
| dvbRcsSystemSatLabsOptionsDeclaration Indicates the SatLabs options supported, as defined in
the SatLabs System Recommendations. | scalar | DvbRcsSatLabsOptionMap | .1.3.6.1.2.1.10.239.1.1.1.3 |
| dvbRcsSystemSatLabsFeaturesDeclaration Indicates the optional compatibility features and minor
options supported, as defined in the SatLabs System
Recommendations. | scalar | DvbRcsSatLabsFeatureMap | .1.3.6.1.2.1.10.239.1.1.1.4 |
| dvbRcsSystemOduAntennaSize Diameter of the antenna. | scalar | cm SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.1.6 |
| dvbRcsSystemOduAntennaGain Antenna peak gain of the ODU. | scalar | x0.1 dBi SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.1.7 |
| dvbRcsSystemOduSspa Power level of the Solid State Power Amplifier
installed in the ODU. | scalar | x0.1 W SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.1.8 |
| dvbRcsSystemOduTxType Type of transmitter installed in the ODU. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.10.239.1.1.1.9 |