dvbRcsCtrlCwEnable
DVB-RCS-MIB ·
.1.3.6.1.2.1.10.239.1.1.5.4
Object
scalar
r/w
Enumeration
This variable will force the RCST to start transmission of CW, if the RCST is first set to the installation state and is properly configured for CW transmission: (1)- off (2)- on
Context
- MIB
- DVB-RCS-MIB
- OID
.1.3.6.1.2.1.10.239.1.1.5.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- dvbRcsRcstControl
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dvbRcsCtrlRebootCommand This variable shall force the RCST to reboot:
(1)- idle
(2)- normal reboot (from current software load)
(3)- reboot from alternate load (swap to alternate
load before reboot) | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.1 |
| dvbRcsCtrlActivateConfigFileCommand Triggers the RCST to use the configuration file and
update its parameters accordingly. Some RCST
implementations may require a reboot for the parameters
to take effect (vendor sp… | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.10 |
| dvbRcsCtrlRcstLogonCommand This variable will initiate an RCST logon:
(1) idle
(2) initiate RCST logon | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.11 |
| dvbRcsCtrlRcstLogoffCommand This variable will initiate an RCST logoff:
(1) idle
(2) initiate RCST logoff | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.12 |
| dvbRcsCtrlRcstRxReacquire This variable will force the RCST to acquire the
forward link and start receiving:
(1) idle
(2) reacquire forward link | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.13 |
| dvbRcsCtrlRcstTxDisable This variable shall force the RCST to stop transmission
(transmit disabled as defined in SatLabs System
Recommendations):
(1)- idle
(2)- initiate Tx Disabled | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.2 |
| dvbRcsCtrlUserTrafficDisable This variable shall disable user traffic (only RCST
management traffic can be transmitted):
(1)- idle
(2)- disable user traffic | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.3 |
| dvbRcsCtrlOduTxReferenceEnable Enables activation and deactivation of the 10 MHz reference
clock in the Tx IFL cable:
(1) off
(2) on | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.5 |
| dvbRcsCtrlOduTxDCEnable Enables activation and deactivation of DC in the Tx IFL
cable:
(1) off
(2) on | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.6 |
| dvbRcsCtrlOduRxDCEnable Enables activation and deactivation of DC in the Rx IFL
cable:
(1) off
(2) on | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.7 |
| dvbRcsCtrlDownloadFileCommand This variable will initiate an RCST configuration file
download process:
(1) idle
(2) download RCST configuration file from TFTP/FTP
server
(3) download RCST installation log … | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.8 |
| dvbRcsCtrlUploadFileCommand This variable will initiate an RCST upload process:
(1) idle
(2) upload RCST configuration file to TFTP/FTP server
(3) upload RCST event/alarm log file to TFTP/FTP server
(4) uplo… | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.5.9 |