dsmonPdistTopNCtlTimeRemaining
DSMON-MIB ·
.1.3.6.1.2.1.16.26.1.3.3.1.4
Object
column
r/w
seconds Integer32
The number of seconds left in the report currently being
collected. When this object is modified by the management
station, a new collection is started, possibly aborting a
currently running report. The new value is used as the
requested duration of this report, and is immediately loaded
into the associated dsmonPdistTopNCtlDuration object.
When the report finishes, the probe will automatically start
another collection with the same initial value of
dsmonPdistTopNCtlTimeRemaining. Thus the management station
may simply read the resulting reports repeatedly, checking
the startTime and duration each time to ensure that a report
was not missed or that the report parameters were not
changed.
While the value of this object is non-zero, it decrements by
one per second until it reaches zero. At the time that this
object decrements to zero, the report is made accessible in
the dsmonPdistTopNTable, overwriting any report that may be
there.
When this object is modified by the management station, any
associated entries in the dsmonPdistTopNTable shall be
deleted.
Context
- MIB
- DSMON-MIB
- OID
.1.3.6.1.2.1.16.26.1.3.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- dsmonPdistTopNCtlEntry
- Table
- dsmonPdistTopNCtlTable
- Siblings
- 10
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsmonPdistTopNCtlIndex An index that uniquely identifies an entry in the
dsmonPdistTopNCtlTable, with the same dsmonPdistTopNCtlIndex
value as this object. Each entry in this table defines one
Top N re… | column | Integer32 | .1.3.6.1.2.1.16.26.1.3.3.1.1 |
| dsmonPdistTopNCtlOwner The entity that configured this entry and is therefore
using the resources assigned to it. | column | RMON-MIBOwnerString | .1.3.6.1.2.1.16.26.1.3.3.1.10 |
| dsmonPdistTopNCtlStatus The status of this dsmonPdistTopNCtlEntry.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value.
If … | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.16.26.1.3.3.1.11 |
| dsmonPdistTopNCtlPdistIndex The dsmonPdistTable for which a top N report will be
prepared on behalf of this entry. The dsmonPdistTable is
identified by the value of the dsmonPdistCtlIndex for that
table - t… | column | Integer32 | .1.3.6.1.2.1.16.26.1.3.3.1.2 |
| dsmonPdistTopNCtlRateBase The variable for each dsmonPdist that the
dsmonPdistTopNRate and dsmonPdistTopNHCRate variables are
based upon. Each dsmonPdistTopN report generated on behalf
of this control ent… | column | Enumeration | .1.3.6.1.2.1.16.26.1.3.3.1.3 |
| dsmonPdistTopNCtlGeneratedReprts The number of reports that have been generated by this
entry. | column | reports SNMPv2-SMICounter32 | .1.3.6.1.2.1.16.26.1.3.3.1.5 |
| dsmonPdistTopNCtlDuration The number of seconds that this report has collected during
the last sampling interval.
When the associated dsmonPdistTopNCtlTimeRemaining object is
set, this objec… | column | seconds Integer32 | .1.3.6.1.2.1.16.26.1.3.3.1.6 |
| dsmonPdistTopNCtlRequestedSize The maximum number of dsmonPdist entries requested for this
report.
When this object is created or modified, the probe SHOULD
set dsmonPdistTopNCtlGrantedSize as cl… | column | table entries Integer32 | .1.3.6.1.2.1.16.26.1.3.3.1.7 |
| dsmonPdistTopNCtlGrantedSize The maximum number of dsmonPdist entries in this report.
When the associated dsmonPdistTopNCtlRequestedSize object is
created or modified, the probe SHOULD set this… | column | table entries Integer32 | .1.3.6.1.2.1.16.26.1.3.3.1.8 |
| dsmonPdistTopNCtlStartTime The value of sysUpTime when this top N report was last
started. In other words, this is the time that the
associated dsmonPdistTopNCtlTimeRemaining object was
modified to start t… | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.16.26.1.3.3.1.9 |