dsliteNATBindEntry
DSLite-MIB ·
.1.3.6.1.2.1.240.1.2.1.1
Object
row
The entry in this table holds the mapping relationship between tunnel information and NAT bind information. Each entry in this table not only needs to match a corresponding entry in the natv2PortMapTable, but also a corresponding entry in the dsliteTunnelTable. So, the INDEX of the entry needs to match a corresponding value in the natv2PortMapTable INDEX and a corresponding value in the dsliteTunnelTable INDEX. These entries are lost upon agent restart.
Context
- MIB
- DSLite-MIB
- OID
.1.3.6.1.2.1.240.1.2.1.1- Type
- row
- Status
- current
- Parent
- dsliteNATBindTable
- Table
- dsliteNATBindTable
- Children
- 14
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsliteNATBindMappingInstanceIndex Index of the NAT instance that created this port
map entry. | column | NATV2-MIBNatv2InstanceIndex | .1.3.6.1.2.1.240.1.2.1.1.1 |
| dsliteNATBindMappingIntPort The mapping's internal port number. This MUST be a
non-zero value. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.240.1.2.1.1.10 |
| dsliteNATBindMappingPool Index of the pool that contains this mapping's external
address and port. If zero, no pool is associated with
this mapping. | column | Unsigned32 | .1.3.6.1.2.1.240.1.2.1.1.11 |
| dsliteNATBindMappingMapBehavior Mapping behavior as described in Section 4.1 of RFC 4787.
endpointIndependent(0), the behavior REQUIRED by
RFC 4787, REQ-1 maps the source address and port to
the s… | column | Enumeration | .1.3.6.1.2.1.240.1.2.1.1.12 |
| dsliteNATBindMappingFilterBehavior Filtering behavior as described in Section 5 of RFC 4787.
endpointIndependent(0) accepts for translation packets
from all combinations of remote address and port
de… | column | Enumeration | .1.3.6.1.2.1.240.1.2.1.1.13 |
| dsliteNATBindMappingAddressPooling Type of address pooling behavior that was used to create
this mapping.
arbitrary(0) pooling behavior means that the NAT instance
may create the new port mapping usi… | column | Enumeration | .1.3.6.1.2.1.240.1.2.1.1.14 |
| dsliteNATBindMappingProto This object specifies the mapping's transport protocol
number. | column | NATV2-MIBProtocolNumber | .1.3.6.1.2.1.240.1.2.1.1.2 |
| dsliteNATBindMappingExtRealm The realm to which dsliteNATBindMappingExtAddress
belongs. | column | OctetString | .1.3.6.1.2.1.240.1.2.1.1.3 |
| dsliteNATBindMappingExtAddressType Address type for the mapping's external address.
This object MUST be set to the value of iPv4(1).
The values of ipv6(2), ipv4z(3), and ipv6z(4) are
not allowed. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.240.1.2.1.1.4 |
| dsliteNATBindMappingExtAddress The mapping's external address. This is the source
address for translated outgoing packets. The address
type is given by dsliteNATBindMappingExtAddressType. | column | OctetString | .1.3.6.1.2.1.240.1.2.1.1.5 |
| dsliteNATBindMappingExtPort The mapping's assigned external port number.
This is the source port for translated outgoing
packets. This MUST be a non-zero value. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.240.1.2.1.1.6 |
| dsliteNATBindMappingIntRealm The realm to which natMappingIntAddress belongs. This
realm defines the IPv6 address space from which the
tunnel source address is taken. The realm of the
encapsulated IPv4 addr… | column | OctetString | .1.3.6.1.2.1.240.1.2.1.1.7 |
| dsliteNATBindMappingIntAddressType Address type of the mapping's internal address.
This object MUST be set to the value of iPv4z(3).
The values of ipv4(1), ipv6(2), and ipv6z(4) are
not allowed. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.240.1.2.1.1.8 |
| dsliteNATBindMappingIntAddress The mapping's internal address. It is the IPv6 tunnel
source address. The address type is given by
dsliteNATBindMappingIntAddressType. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.240.1.2.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsliteNATBindMappingInstanceIndex Index of the NAT instance that created this port
map entry. | column | NATV2-MIBNatv2InstanceIndex | .1.3.6.1.2.1.240.1.2.1.1.1 |
| dsliteNATBindMappingProto This object specifies the mapping's transport protocol
number. | column | NATV2-MIBProtocolNumber | .1.3.6.1.2.1.240.1.2.1.1.2 |
| dsliteNATBindMappingExtRealm The realm to which dsliteNATBindMappingExtAddress
belongs. | column | OctetString | .1.3.6.1.2.1.240.1.2.1.1.3 |
| dsliteNATBindMappingExtAddressType Address type for the mapping's external address.
This object MUST be set to the value of iPv4(1).
The values of ipv6(2), ipv4z(3), and ipv6z(4) are
not allowed. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.240.1.2.1.1.4 |
| dsliteNATBindMappingExtAddress The mapping's external address. This is the source
address for translated outgoing packets. The address
type is given by dsliteNATBindMappingExtAddressType. | column | OctetString | .1.3.6.1.2.1.240.1.2.1.1.5 |
| dsliteNATBindMappingExtPort The mapping's assigned external port number.
This is the source port for translated outgoing
packets. This MUST be a non-zero value. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.240.1.2.1.1.6 |
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| dsliteTunnelStartAddress The IPv6 address of the initiator of the tunnel.
The address type is given by dsliteTunnelAddressType. | column | OctetString | .1.3.6.1.2.1.240.1.1.1.1.2 |