dsgIfStdTunnelFilterClientIdValue
DSG-IF-STD-MIB ·
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.16
Object
column
OctetString
The Client Identification Value. The content depends on the value of the dsgIfStdTunnelFilterClientIdType. For dsgIfStdTunnelFilterClientIdType of type cableCard(0), this object will return the empty (i.e., zero length) string. For dsgIfStdTunnelFilterClientIdType of a type broadcast(1), this object will have a 16-bit value whether or not it is a length 0 or length 2 broadcast ID. If the value is 0, then the encoded TLV in the DCD would be the original, zero length, broadcast ID. If the value is specified in Table 5-2, then the TLV in the DCD would be a length 2 broadcast ID followed by the value. For dsgIfStdTunnelFilterClientIdType of a type macAddress(2), this object is a well known MAC address. For dsgIfStdTunnelFilterClientIdType of a type caSystemId(3), this object is a CA System ID. For dsgIfStdTunnelFilterClientIdType of a type applicationId(4), this object is an application ID. Client IDs representing types broadcast(1), caSystemId(3) or applicationId(4) are encoded in DCD messages as Unsigned integers and configured in this object as 6 octet string with the 2 LSB for the client ID value, e.g., an applicationId 2048 (0x0800) is encoded as '000000000800'h.
Context
- MIB
- DSG-IF-STD-MIB
- OID
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dsgIfStdTunnelFilterEntry
- Table
- dsgIfStdTunnelFilterTable
- Siblings
- 15
Syntax
OctetString
Values & Constraints
Object Constraints
range: 6-6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsgIfStdTunnelFilterIndex The unique index of entries in this table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.1 |
| dsgIfStdTunnelFilterPkts The total number of Packets being classified and filtered
for this tunnel entry since creation of the entry. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.10 |
| dsgIfStdTunnelFilterOctets The total number of octets being classified and filtered
for this tunnel entry since creation of the entry. | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.11 |
| dsgIfStdTunnelFilterTimeActive The total number of seconds that this tunnel entry has
been instantiated. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.12 |
| dsgIfStdTunnelFilterTunnelId In DSG Advanced Mode, this is the tunnel identifier passed
to the DSG eCM by the DSG-Client Controller for this Tunnel
Filter entry. This value may correspond to the DSG Rule ID
f… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.13 |
| dsgIfStdTunnelFilterDsid When operating with Multicast DSID Forwarding (MDF)
enabled, this object contains the DSID value obtained
from the DA-to-DSID TLV in the MDD. If no DSID has been advertised … | column | DOCS-IF3-MIBDsid | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.14 |
| dsgIfStdTunnelFilterClientIdType The Client Identification type. The value of cableCard(0)
describes a filter requested by the CableCARD on an OpenCable
Host. A DSG client id of type broadcast(1) describes a fil… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.15 |
| dsgIfStdTunnelFilterApplicationId deprecated The ID of the application to which this DSG Tunnel is to
be forwarded. This object returns -1 for: DSG Tunnels that
do not have an associated Application ID or for DSG Tunnels
for… | column | Integer32 | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.2 |
| dsgIfStdTunnelFilterMacAddress The destination MAC Address associated with this
tunnel entry. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.3 |
| dsgIfStdTunnelFilterIpAddressType The type of InetAddress for dsgIfStdTunnelFilterSrcIpAddr,
dsgIfStdTunnelFilterSrcIpMask and
dsgIfStdTunnelFilterDestIpAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.4 |
| dsgIfStdTunnelFilterSrcIpAddr The source IP Address associated to this tunnel for the
DSG eCM filtering and forwarding process. A value of zero
indicates that source IP Address filtering does not apply.
The ty… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.5 |
| dsgIfStdTunnelFilterSrcIpMask The Source IP Mask to be used along with
dsgIfStdTunnelFilterSrcIpAddr for filtering
and forwarding of DSG Tunnel traffic.
The type of this address is determined by the value of … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.6 |
| dsgIfStdTunnelFilterDestIpAddr The destination IP Address associated to this tunnel for
the DSG eCM filtering and forwarding process. A value of
zero indicates that destination IP Address filtering does
not ap… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.7 |
| dsgIfStdTunnelFilterDestPortStart The lower UDP port value to be matched for this tunnel. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.8 |
| dsgIfStdTunnelFilterDestPortEnd The upper UDP port value to be matched for this tunnel. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.4.1.2.1.1.9 |