tRingPortGrpMode
DOT5-LOG-MIB ·
.1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.9
Object
column
mandatory
r/w
Enumeration
This object defines the mode of the board. In Auto Mode, the board is using its hardware defaults. The default values of the board are all ports enabled, speed selected by the HW jumper on the board, the FNB attempts to attach left and right and not bypassed, ring port phantom current (if applicable) is controlled via a HW switch, and selectable media (if applicable) is managed also via a HW switch. In Management Mode, the hardware defaults may be overridden by network or local management.
Context
- MIB
- DOT5-LOG-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.9- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- tRingPortGrpEntry
- Table
- tRingPortGrpTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | managementMode |
2 | autoMode |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tRingPortGrpId mandatory Returns an index to a port group for which the information in
this table pertains. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.1 |
| tRingPortGrpSpeed mandatory This object sets the speed of the board. On devices with a MAC
interface this object is read-only, and will return NO SUCH
NAME on write requests. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.10 |
| tRingPortGrpSpeedFault mandatory This object reports a ring speed fault. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.11 |
| tRingPortGrpSpeedFaultLocation mandatory This object indicates the last ring speed fault detection circuit(s)
to detect the fault, if there was one. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.12 |
| tRingPortGrpBypassRingPortState mandatory This object sets and reports the state of the ring bypass
relay on those token ring boards which support the relay. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.13 |
| tRingPortGrpName mandatory An ASCII name assigned to this port group. The default name is
Board n', where n is a number 1 through n. | column | OctetString | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.2 |
| tRingPortGrpStnPortCount mandatory This object defines the total number of station ports on the
addressed board. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.3 |
| tRingPortGrpRingPortCount mandatory This object defines the total number of ring ports (ring-in
or ring-out) on the addressed board. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.4 |
| tRingPortGrpStnPortsEnable mandatory Setting this object to enable will cause all the station ports
in this port group to be enabled. Setting this object to noEnable
will have no effect on the station ports in this … | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.5 |
| tRingPortGrpRingPortsEnable mandatory Setting this object to enable will cause all the ring ports
in this port group to be enabled. Setting this object to noEnable
will have no effect on the ring ports in this port g… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.6 |
| tRingPortGrpStnPortsOn mandatory Returns the total number of enabled station ports in this port
group. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.7 |
| tRingPortGrpRingPortsOn mandatory Returns the total number of enabled ring in/out ports in this
port group. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.8 |