tRingMgmtBcnRecRingPortRetryCount
DOT5-LOG-MIB ·
.1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.14
Object
scalar
mandatory
r/w
Integer32
This object defines the number of times a token ring ring port
will be re-enabled after it has been determined that the port is
causing the ring to beacon. Values other than 0-100 and 999 will
result in MIB bad value.
Default of object is product dependent.
Refer to individual product documentation.
Valid integer values are defined as:
0 ...disable ring port retries
1 - 100 ...retry ring port n times
999 ... retry ring port infinite times
Context
- MIB
- DOT5-LOG-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.14- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- tRingMgmtRing
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-999
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tRingMgmtRingName mandatory The ASCII name assigned to this ring. This name defaults to 'Network n',
where n is a unique integer value from 1 to n. | scalar | OctetString | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.1 |
| tRingMgmtRingSpeed mandatory Returns the ring speed of the ring, if known. The speed is
designated by the value returned:
unknown..............0
fourMegaBits.........4
sixteenMegaBits.....16 | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.10 |
| tRingMgmtActiveMonitor mandatory Returns the address of the active monitor on this ring, if known.
If unknown, the NULL address (00-00-00-00-00-00) is returned. | scalar | OctetString | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.11 |
| tRingMgmtRingNumber mandatory A read of this object returns the ring number of the attached ring.
If the ring number is indeterminate, a zero is returned. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.12 |
| tRingMgmtBeaconRecovery mandatory This object controls the operation of beacon recovery. A write of disable
to this object will cause the beacon recovery process to become inactive
on this host. A write of ena… | scalar | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.13 |
| tRingMgmtBcnRecRingPortRetryDelay mandatory This object defines the time delay between disabling a token ring
ring port due to beaconing and re-enabling the port to check the
state of the ring port.
Setting this object to z… | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.15 |
| tRingMgmtBcnRecStnPortRetryCount mandatory This object defines the number of times a token ring station port
will be re-enabled after it has been determined that the port is
causing the ring to beacon. Values other than 0-… | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.16 |
| tRingMgmtBcnRecStnPortRetryDelay mandatory This object defines the time delay between disabling a token ring
station port due to beaconing and re-enabling the port to check the
state of the station port.
Setting this objec… | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.17 |
| tRingMgmtBcnRecBrdBypassRetryCount mandatory This object defines the number of times a token ring MIM board,
having been bypassed by beacon recovery, will be un-bypassed to
determine if the MIM board is causing the ring to b… | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.18 |
| tRingMgmtBcnRecBrdBypassRetryDelay mandatory This object defines the time delay between bypassing a token ring
MIM board due to beaconing and re-enabling the MIM board to check
the state of the board.
Setting this object to … | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.19 |
| tRingMgmtStnPortCount mandatory Returns the total number of physical ports on this ring which may
be controlled by this device. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.2 |
| tRingMgmtBcnRecBrdWrapRetryCount mandatory This object defines the number of times a token ring MIM board,
having been wrapped left or right by beacon recovery, will be
un-wrapped to determine if the MIM board is causing t… | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.20 |
| tRingMgmtBcnRecBrdWrapRetryDelay mandatory This object defines the time delay between wrapping a token ring
MIM board left or right due to beaconing and un-wrapping the MIM
board to check the state of the board.
Setting th… | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.21 |
| tRingMgmtRingPollRecovery mandatory This object controls the operation of ring poll failure recovery.
A write of disable to this object will cause the ring poll failure
recovery process to become inactive on this ho… | scalar | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.22 |
| tRingMgmtRingPortCount mandatory Returns the total number of ring in/out ports on this ring
which may be controlled by this device. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.3 |
| tRingMgmtStnPortsEnable mandatory Setting this object to enable will cause all the station ports
on the ring which may be controlled by this device to be enabled.
Setting this object to noEnable will have no effec… | scalar | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.4 |
| tRingMgmtRingPortsEnable mandatory Setting this object to enable will cause all the ring in/out ports
on the ring which may be controlled by this device to be
enabled. Setting this object to noEnable will have no … | scalar | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.5 |
| tRingMgmtStnPortsOn mandatory Returns the total number of enabled station ports on this ring
which may be controlled by this device. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.6 |
| tRingMgmtRingPortsOn mandatory Returns the total number of enabled ring in/out ports on this
ring which may be controlled by this device. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.7 |
| tRingMgmtStations mandatory Returns the number of stations currently inserted on the ring,
if known (includes this device). If not known, returns zero. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.8 |
| tRingMgmtRingState mandatory Returns the operational state of the ring, if known. | scalar | Enumeration | .1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.9 |