dot12ControlMode
DOT12-IF-MIB ·
.1.3.6.1.2.1.10.45.1.1.1.9
Object
column
r/w
Enumeration
This object is used to configure and report
whether or not this interface is operating in
master mode. In a Demand Priority network, end
node interfaces typically operate in slave mode,
while switch interfaces may control the Demand
Priority protocol and operate in master mode.
This object may be implemented as a read-only
object by those agents and interfaces that do not
implement software control of master mode. In
particular, interfaces that cannot operate in
master mode, and interfaces on which master mode
is controlled by a pushbutton on the device,
should implement this object read-only.
Some interfaces do not require network management
configuration of this feature and can autosense
whether to use master mode or slave mode. The
value 'learn' is used for that purpose. While
autosense is taking place, the value 'learn' is
returned.
A network management operation which modifies the
value of dot12ControlMode causes the interface
to retrain.
Context
- MIB
- DOT12-IF-MIB
- OID
.1.3.6.1.2.1.10.45.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dot12ConfigEntry
- Table
- dot12ConfigTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | masterMode |
2 | slaveMode |
3 | learn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot12CurrentFramingType When dot12DesiredFramingType is one of
'frameType88023' or 'frameType88025', this is the
type of framing asserted by the interface.
When dot12DesiredFramingType is … | column | Enumeration | .1.3.6.1.2.1.10.45.1.1.1.1 |
| dot12DesiredFramingType The type of framing which will be requested by
the interface during the next interface MAC
initialization or open action.
In master mode, this is the framing mode w… | column | Enumeration | .1.3.6.1.2.1.10.45.1.1.1.2 |
| dot12FramingCapability The type of framing this interface is capable of
supporting. | column | Enumeration | .1.3.6.1.2.1.10.45.1.1.1.3 |
| dot12DesiredPromiscStatus This object is used to select the promiscuous
mode that this interface will request in the next
training packet issued on this interface.
Whether the repeater grants the requested… | column | Enumeration | .1.3.6.1.2.1.10.45.1.1.1.4 |
| dot12TrainingVersion The value that will be used in the version bits
(vvv bits) in training frames on this interface.
This is the highest version number supported by
this MAC. | column | Integer32 | .1.3.6.1.2.1.10.45.1.1.1.5 |
| dot12LastTrainingConfig This 16 bit field contains the configuration
bits from the most recent error-free training
frame received during training on this interface.
Training request frames are received w… | column | OctetString | .1.3.6.1.2.1.10.45.1.1.1.6 |
| dot12Commands If the current value of dot12Status is 'closed',
setting the value of this object to 'open' will
change the corresponding instance of MIB-II's
ifAdminStatus to 'up', cause this in… | column | Enumeration | .1.3.6.1.2.1.10.45.1.1.1.7 |
| dot12Status The current interface status with respect to
training. One of the following values:
opened - Training has completed
successfully.
cl… | column | Enumeration | .1.3.6.1.2.1.10.45.1.1.1.8 |