docsPnmCmtsUsSpecAnEnable
DOCS-PNM-MIB ·
.1.3.6.1.4.1.4491.2.1.27.1.3.8.1.1
Object
This attribute causes the CMTS to begin the measurement of a probe
for the selected CM or for a quiet period if the UseIdleSid attribute
is enabled. The Enable attribute is cleared when the measurement has
been completed. If the TriggerMode is FreeRunning then the Enable
attribute will remain true until cleared by the PNM server.
Interaction with other table rows:
- This object returns 'inconsistentValue' if set to 'true' while the
value of 'docsPnmCmtsUsSpecAnMeasStatus' is a value of 'busy'.
- Default values are provided for read-write objects in this table; thus,
this object may be set to 'true' without explicitly setting these values.
However, the default values may not be appropriate and care should be
taken to insure these values are correct for the desired test case.
- Setting this object to a value of 'true' will change the value of the
'docsPnmCmtsUsSpecAnMeasStatus' to 'busy'.
Context
- MIB
- DOCS-PNM-MIB
- OID
.1.3.6.1.4.1.4491.2.1.27.1.3.8.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- docsPnmCmtsUsSpecAnEntry
- Table
- docsPnmCmtsUsSpecAnTable
- Siblings
- 10
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsPnmCmtsUsSpecAnMeasStatus This attribute is used to determine the status of the measurement.
The PNM server will query this value to determine when the file
is ready for transfer. | column | MeasStatusType | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.10 |
| docsPnmCmtsUsSpecAnFileName This attribute is the name of the file with the Spectrum Analysis data
at the CMTS that is to be downloaded using TFTP to the PNM server.
This value can only be cha… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.11 |
| docsPnmCmtsUsSpecAnTrigMode This attribute is used to control the trigger mode for the Spectrum
Analysis capture.
This object cannot be changed while a capture is in progress. It will
return a… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.2 |
| docsPnmCmtsUsSpecAnMiniSlotCnt This attribute controls the numbe rof minislots the CMTS capturs
during the Spectrum Analysis capture.
This object cannot be changed while a capture is in progress.… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.3 |
| docsPnmCmtsUsSpecAnSid This attribute is the SID corresponding to the CM which is granted a
burst opportunity for the purpose of Spectrum Analysis. Typically the
CMTS will schedule a unicast Station Mai… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.4 |
| docsPnmCmtsUsSpecAnMiniSlotNum This attribute provides a mechanism by which the CMTS can begin the
Spectrum Analysis at a subcarrier frequency corresponding to the
MiniSlotNumber. This attribute is used when th… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.5 |
| docsPnmCmtsUsSpecAnCmMac This attribute is used by the CCAP to trigger on a grant for any SID
assigned to the CM and to perform the Spectrum Analysis Capture when
the burst corresponding to that grant is … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.6 |
| docsPnmCmtsUsSpecAnCenterFreq This attribute determines the center frequency of the Spectrum Analysis
capture if the trigger mode is FreeRunning. If the trigger mode is not
FreeRunning, the CMTS determines the… | column | Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.7 |
| docsPnmCmtsUsSpecAnSpan This attribute determines the frequency span of the Spectrum Analysis
capture if the trigger mode is FreeRunning. If the trigger mode is not
FreeRunning, the CMTS determines the v… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.8 |
| docsPnmCmtsUsSpecAnNumberOfBins This attribute determines the number of bins for the Spectrum Analysis
capture if the trigger mode is FreeRunning. If the trigger mode is not
FreeRunning, the CMTS determines the … | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.3.8.1.9 |