docsPnmCmtsUsOfdmaRxPwrEnable
DOCS-PNM-MIB ·
.1.3.6.1.4.1.4491.2.1.27.1.3.6.1.1
Object
This attribute causes the CMTS to begin a measurement of the received
upstream channel power for the CM whose MAC address was specified in
the CmMac attribute.
Interaction with other table rows:
- This object returns 'inconsistentValue' if set to 'true' while the
value of 'docsPnmCmtsUsOfdmaRxPwrMeasStatus' is a value of 'busy'.
- Default values are provided for read-write objects in this table; thus,
this object may be set to 'true' without explicitly setting these values.
However, the default values may not be appropriate and care should be
taken to insure these values are correct for the desired test case.
- Setting this object to a value of 'true' will change the value of the
'docsPnmCmtsUsOfdmaRxPwrMeasStatus' to 'busy'.
Context
- MIB
- DOCS-PNM-MIB
- OID
.1.3.6.1.4.1.4491.2.1.27.1.3.6.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- docsPnmCmtsUsOfdmaRxPwrEntry
- Table
- docsPnmCmtsUsOfdmaRxPwrTable
- Siblings
- 5
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsPnmCmtsUsOfdmaRxPwrCmMac This attribute represents the MAC address of the CM whose Received
upstream channel power is being measured.
This object cannot be changed while a capture is in pro… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.27.1.3.6.1.2 |
| docsPnmCmtsUsOfdmaRxPwrPreEq This attribute is used by the CMTS to enable or disable pre-equalization
of the probe. The pre-equalization is controlled by a bit in the Probe
Information Element sent in a MAP t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.27.1.3.6.1.3 |
| docsPnmCmtsUsOfdmaRxPwrNumAvgs This attribute controls the time average over the number of probes the
CCAP will use to calculate the docsPnmCmtsUsOfdmaRxPwrOnePtSix. The
average is simply the sum of the docsPnm… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.3.6.1.4 |
| docsPnmCmtsUsOfdmaRxPwrOnePtSix This attribute represents the average power of the probe measured by
the CMTS, reported as the Power Spectral Density in an equivalent
6.4 MHz spectrum, for the CM whose MAC addre… | column | DOCS-IF-MIBTenthdB | .1.3.6.1.4.1.4491.2.1.27.1.3.6.1.5 |
| docsPnmCmtsUsOfdmaRxPwrMeasStatus This attribute is used to determine the status of the measurement.
When the Status = SampleReady, the CCAP is ready for the Upstream
Power data to be read. | column | MeasStatusType | .1.3.6.1.4.1.4491.2.1.27.1.3.6.1.6 |