docsPnmCmtsUsOfdmaRxMerPreEq
DOCS-PNM-MIB ·
.1.3.6.1.4.1.4491.2.1.27.1.3.7.1.3
Object
This attribute is used by the CMTS to enable or disable Pre
Equalization of the probe. The Pre Equalization is controlled by a
bit in the Probe Information Element sent in a MAP to the CM.
This object cannot be changed while a capture is in progress. It will
return a value of 'inconsistentValue' if set while the value of
'docsPnmCmtsUsOfdmaRxMerMeasStatus' is set to a value of 'busy'.
Context
- MIB
- DOCS-PNM-MIB
- OID
.1.3.6.1.4.1.4491.2.1.27.1.3.7.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- docsPnmCmtsUsOfdmaRxMerEntry
- Table
- docsPnmCmtsUsOfdmaRxMerTable
- Siblings
- 5
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsPnmCmtsUsOfdmaRxMerEnable This attribute causes the CMTS to begin a measurement of the received
MER per subcarrier for the CM whose MAC address was specified in the
CmMac attribute.
Interact… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.1 |
| docsPnmCmtsUsOfdmaRxMerCmMac This attribute represents the MAC address of the CM whose Rx MER is
being measured.
This object cannot be changed while a capture is in progress. It will
return a v… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.2 |
| docsPnmCmtsUsOfdmaRxMerNumAvgs This attribute controls the number of probes the CMTS will use to
calculate the Rx MER per subcarrier. The average will be computed
using the 'leaky integrator' method, where repo… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.4 |
| docsPnmCmtsUsOfdmaRxMerMeasStatus This attribute is used to determine the status of the measurement.
When the MeasStatus = SampleReady, the CMTS is ready for the RxMER
data to be read. | column | MeasStatusType | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.5 |
| docsPnmCmtsUsOfdmaRxMerFileName This attribute is the name of the file with the RxMER data for a
specified CM at the CMTS that is to be downloaded using TFTP to the
PNM server. This value can only be changed whi… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.6 |