docsPnmCmtsUsOfdmaRxMerEnable
DOCS-PNM-MIB ·
.1.3.6.1.4.1.4491.2.1.27.1.3.7.1.1
Object
This attribute causes the CMTS to begin a measurement of the received
MER per subcarrier for the CM whose MAC address was specified in the
CmMac attribute.
Interaction with other table rows:
- This object returns 'inconsistentValue' if set to 'true' while the
value of 'docsPnmCmtsUsOfdmaRxMerMeasStatus' is a value of 'busy'.
- Default values are provided for read-write objects in this table; thus,
this object may be set to 'true' without explicitly setting these values.
However, the default values may not be appropriate and care should be
taken to insure these values are correct for the desired test case.
- Setting this object to a value of 'true' will change the value of the
'docsPnmCmtsUsOfdmaRxMerMeasStatus' to 'busy'.
Context
- MIB
- DOCS-PNM-MIB
- OID
.1.3.6.1.4.1.4491.2.1.27.1.3.7.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- docsPnmCmtsUsOfdmaRxMerEntry
- Table
- docsPnmCmtsUsOfdmaRxMerTable
- Siblings
- 5
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsPnmCmtsUsOfdmaRxMerCmMac This attribute represents the MAC address of the CM whose Rx MER is
being measured.
This object cannot be changed while a capture is in progress. It will
return a v… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.2 |
| docsPnmCmtsUsOfdmaRxMerPreEq This attribute is used by the CMTS to enable or disable Pre
Equalization of the probe. The Pre Equalization is controlled by a
bit in the Probe Information Element sent in a MAP t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.3 |
| docsPnmCmtsUsOfdmaRxMerNumAvgs This attribute controls the number of probes the CMTS will use to
calculate the Rx MER per subcarrier. The average will be computed
using the 'leaky integrator' method, where repo… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.4 |
| docsPnmCmtsUsOfdmaRxMerMeasStatus This attribute is used to determine the status of the measurement.
When the MeasStatus = SampleReady, the CMTS is ready for the RxMER
data to be read. | column | MeasStatusType | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.5 |
| docsPnmCmtsUsOfdmaRxMerFileName This attribute is the name of the file with the RxMER data for a
specified CM at the CMTS that is to be downloaded using TFTP to the
PNM server. This value can only be changed whi… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4491.2.1.27.1.3.7.1.6 |