docsPnmCmDsHistTimeOut
DOCS-PNM-MIB ·
.1.3.6.1.4.1.4491.2.1.27.1.2.9.1.3
Object
column
r/w
seconds Unsigned32
This object sets a seconds time-out timer for capturing histogram data.
When the timeout expires the 'docsPnmCmDsHistEnable' object will be set to
'false' and the capture will stop. When this happens, the data collected up
to this point will be saved in the the file defined by the
'docsPnmCmDsHistFileName', and the value of 'docsPnmCmDsHistMeasStatus'
will be set to 'sampleReady'.
Setting this value does not start a capture. Captures can only be started by
setting the 'docsPnmCmDsHistEnable' object.
If this object is written while the 'docsPnmCmDsHistEnable' object is 'true',
the timer is restarted.
If this object is set to a value of 'zero', there is no timeout and the
collection of data will continue indefinitely.
This object returns the value that it was last set with.
Context
- MIB
- DOCS-PNM-MIB
- OID
.1.3.6.1.4.1.4491.2.1.27.1.2.9.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- docsPnmCmDsHistEntry
- Table
- docsPnmCmDsHistTable
- Siblings
- 9
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsPnmCmDsHistEnable Setting this object to a value of 'true' instructs the CM to begin
collection of histogram data and when enabled, the CM continues
producing new data at its own rate.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.27.1.2.9.1.1 |
| docsPnmCmDsHistFileName This object is the name of the file at the CM which is to be
transferred to the PNM server. The data is stored as 32 bit integers
for the hit and dwell count values.
… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4491.2.1.27.1.2.9.1.10 |
| docsPnmCmDsHistRestart This attribute is used to restart collection of histogram data.
If 'docsPnmCmDsHistEnable' is 'true' then setting this object to
'true' clears the old data and starts collecting a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.27.1.2.9.1.2 |
| docsPnmCmDsHistSymmetry This attribute is used to indicate whether 256 or 255 bins were used
for the measurement.
Even Symmetry = 'false' (default):
The histogram has even symmetry about t… | column | Bins SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.27.1.2.9.1.4 |
| docsPnmCmDsHistDwellCnts This attribute represents the total number Dwell Counts for each
bin for the Current capture. If the dwell count for all bins is the
same then only a single value is reported. The… | column | OctetString | .1.3.6.1.4.1.4491.2.1.27.1.2.9.1.5 |
| docsPnmCmDsHistHitCnts This attribute represents the total number Hit Counts for each bin
for the Current capture. If odd symmetry is used then there will be 255 bins.
The value for each bin is reported… | column | OctetString | .1.3.6.1.4.1.4491.2.1.27.1.2.9.1.6 |
| docsPnmCmDsHistCntStartTime This attribute represents the time when the collection of
histogram data was started.
This value is the 'epoch time'. The epoch time (also known as
'unix time') is … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.2.9.1.7 |
| docsPnmCmDsHistCntEndTime This attribute represents the time when the collection of
histogram data was stopped.
This value is the 'epoch time'. The epoch time (also known as
'unix time') is … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.27.1.2.9.1.8 |
| docsPnmCmDsHistMeasStatus This attribute is used to determine the status of the measurement.
The PNM server will query this value to determine when the file
is ready for transfer. | column | MeasStatusType | .1.3.6.1.4.1.4491.2.1.27.1.2.9.1.9 |