docsIf31CmtsCmRegStatusMaxUsableUsFreq
DOCS-IF31-MIB ·
.1.3.6.1.4.1.4491.2.1.28.1.3.1.8
Object
This attribute is the lower of the CCAP's maximum supported
upstream frequency and the CM's maximum supported upstream
frequency. It indicates the highest upstream frequency the CCAP
can use to receive signals from this CM taking into account the
capabilities of both devices.
Note: there is no minimum usable upstream frequency attribute as
this is 5MHz for both CCAP and CM devices.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns zero.
Context
- MIB
- DOCS-IF31-MIB
- OID
.1.3.6.1.4.1.4491.2.1.28.1.3.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- Hz
- Parent
- docsIf31CmtsCmRegStatusEntry
- Table
- docsIf31CmtsCmRegStatusTable
- Siblings
- 9
Syntax
Hz SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIf31CmtsCmRegStatusAssignedEmIds This attribute reports the set of CMTS-assigned EM-IDs for
this CM. This attribute is encoded as an array 16-bit binary
values with up to 3 elements. The broadcast EM-ID is not
in… | column | EmIdList | .1.3.6.1.4.1.4491.2.1.28.1.3.1.1 |
| docsIf31CmtsCmRegStatusPartialChanState This attribute is a bit-field which indicates the type of OFDM
channel issue that this CM is experiencing, based on what the
MAC-layer shows. See PartialChannelType for further de… | column | PartialChannelType | .1.3.6.1.4.1.4491.2.1.28.1.3.1.10 |
| docsIf31CmtsCmRegStatusDsProfileIdList This attribute is a variable length series of hexadecimal
octets where each series entry consists of the following fields
(encoded in the following order):
- The Ch… | column | OctetString | .1.3.6.1.4.1.4491.2.1.28.1.3.1.2 |
| docsIf31CmtsCmRegStatusUsProfileIucList This attribute is a variable length series of hexadecimal
octets where each series entry consists of the following fields
(encoded in the following order):
- The Ch… | column | OctetString | .1.3.6.1.4.1.4491.2.1.28.1.3.1.3 |
| docsIf31CmtsCmRegStatusTcsPhigh This attribute reports the P1.6hi value for the CM's Transmit
Channel Set.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is … | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.28.1.3.1.4 |
| docsIf31CmtsCmRegStatusTcsDrwTop This attribute reports the level of the top of the Dynamic Range
Window. The value is expressed in dBmV and is the result of a
calculation equal to P1.6hi - P1.6load_min_set.
This… | column | dBmV SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.28.1.3.1.5 |
| docsIf31CmtsCmRegStatusMinUsableDsFreq This attribute is the higher of the CCAP's minimum supported
downstream frequency and the CM's minimum supported downstream
frequency. It indicates the lowest downstream frequency… | column | Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.28.1.3.1.6 |
| docsIf31CmtsCmRegStatusMaxUsableDsFreq This attribute is the lower of the CCAP's maximum supported
downstream frequency and the CM's maximum supported downstream
frequency. It indicates the highest downstream frequency… | column | Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.28.1.3.1.7 |
| docsIf31CmtsCmRegStatusPartialSvcState This attribute indicates the type of 'bonding group' issue
that this CM is experiencing, based on what the MAC-layer
shows. See PartialServiceType for further detail.
This object … | column | PartialServiceType | .1.3.6.1.4.1.4491.2.1.28.1.3.1.9 |