docsIfMCmtsDepiSessionInfoMaxPayload
DOCS-IF-M-CMTS-MIB ·
.1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.3
Object
column
Unsigned32
The maximum MTU negotiated between the M-CMTS Core and the EQAM during the DEPI session establishment process. The local payload MTU is known from the IfEntry of this M-CMTS Downstream Interface. It considers the header subtractions as indicated in the DEPI specification.
Context
- MIB
- DOCS-IF-M-CMTS-MIB
- OID
.1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- docsIfMCmtsDepiSessionInfoEntry
- Table
- docsIfMCmtsDepiSessionInfoTable
- Siblings
- 12
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIfMCmtsDepiSessionInfoCfgIndex The value of the docsIfMCmtsDepiSessionConfigTable index
(docsIfMCmtsDepiSessionConfigIndex) associated to this
M-CMTS Downstream Interface Entry. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.1 |
| docsIfMCmtsDepiSessionInfoState A high level state of the DEPI session.
'depiSessionUp'
Indicates the DEPI session is UP and able to pass
traffic.
'depiSessionError'
Indicates the DEPI session encount… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.10 |
| docsIfMCmtsDepiSessionInfoErrorCode The error Code raised when docsIfMCmtsDepiSessionInfoState
is 'depiSessionError'
'invalidMACInterfaceValue'
Indicates wrong assignment of the M-CMTS MAC interface
ifIndex… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.11 |
| docsIfMCmtsDepiSessionInfoCreationTime The sysUptime when the entry was turned active. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.12 |
| docsIfMCmtsDepiSessionInfoStorage The storage realization of the entry.
This object value is the same as the corresponding
entry of docsIfMCmtsDepiSessionInfoStorage. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.13 |
| docsIfMCmtsDepiSessionInfoUdpPort The UDP Port reported by the EQAM when the DEPI session
uses the L2TPv3 Header Over UDP.
This object reports a value 0 when the DEPI session is
running with the L2TPv3 Session I… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.2 |
| docsIfMCmtsDepiSessionInfoPathPayload The maximum MTU traversing the CIN from M-CMTS Core to the
EQAM. This calculated by the M-CMTS core by procedures such
MTU discovery as described in the DEPI specification. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.4 |
| docsIfMCmtsDepiSessionInfoIncludeDOCSISMsgs Reports if the M-CMTS includes DOCSIS MAP messages
and other MAC Management messages in the Downstream
interface entry associated with this DEPI control entry.
The CMTS determines… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.5 |
| docsIfMCmtsDepiSessionInfoRsrcAllocResp In the M-CMTS core a reference to
docsIfMCmtsDepiRsrcAllocIndex of
docsIfMCmtsDepiRsrcAllocTable as reported by the EQAM
during the DEPI session establishment process.
… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.6 |
| docsIfMCmtsDepiSessionInfoConnCtrlID Indicates the DEPI Tunnel Connection Control Identifier
For L2TPv3 this corresponds to CCID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.7 |
| docsIfMCmtsDepiSessionInfoEQAMSessionID Indicates the DEPI Session Identifier associated to the
EQAM IP host. In the M-CMTS it corresponds to the L2TPv3
Remote Session ID, while in the EQAM indicates the local
Session … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.8 |
| docsIfMCmtsDepiSessionInfoOwner The creation method of the entry. Applicable to both
M-CMTS Core and EQAM devices.
'management'
Indicates the entry was created via a direct
configuration management su… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.9 |