docsIfMCmtsChannelBlockTestType – DOCS-IF-M-CMTS-MIB

Object

column Enumeration

A set of in-service and out-of-service test modes.
The value 'noTest'(1) is the normal condition after
reinitialization where the QAM channels are expected in
operation.
              
'noTest' 
It is also used to take out of testing mode
a QAM channel within the block.
              
In-service tests modes:
'offOthersNormal'
It is the condition where the QAM Channel indicated in
docsIfMCmtsChannelBlockTestIfIndex has its carrier 
suppressed and the other channels in the 
Block Channel are operational.
'allOff'
All QAM channels carriers in the channel block are
Suppressed. 
'onOthersOff'
It is the condition where the QAM channel indicated in
docsIfMCmtsChannelBlockTestIfIndex is in operation
and the other QAM channels in the channel Block have
their carriers suppressed.
              
Out-of-service test modes:
'cwOnOthersOff'
It is the condition where the QAM channel indicated in 
docsIfMCmtsChannelBlockTestIfIndex transmits a 
continuous wave (CW) while the other QAM 
channels in the channel Block have their carriers 
suppressed.
'cwOnOthersNormal'
It is the condition where the QAM channel indicated
in docsIfMCmtsChannelBlockTestIfIndex transmits a 
continuous wave (CW) while the other QAM channels in
the channel Block are operational.
              
'clockTest'
It is the condition where the QAM channel indicated in
docsIfMCmtsChannelBlockTestIfIndex transmits a sequence 
of alternating -1 and 1 symbols.
              
This object value does not persist after system 
Reinitialization.
The value of this object is meaningless if 
docsIfMCmtsChannelBlockTestIfIndex is set to zero.

Context

MIB: DOCS-IF-M-CMTS-MIB
OID: .1.3.6.1.4.1.4491.2.1.6.1.3.5.1.5
Type: column
Access: readonly
Status: current
Parent: docsIfMCmtsChannelBlockEntry
Table: docsIfMCmtsChannelBlockTable
Siblings: 5

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	noTest
`2`	offOthersNormal
`3`	allOff
`4`	onOthersOff
`5`	cwOnOthersOff
`6`	cwOnOthersNormal
`7`	clockTest

Related Objects

Sibling Objects

Object	Type	Syntax	OID
docsIfMCmtsChannelBlockPhysicalIndex The Physical Index of the QAM Channel Block.	column	ENTITY-MIBPhysicalIndex	`.1.3.6.1.4.1.4491.2.1.6.1.3.5.1.1`
docsIfMCmtsChannelBlockNumberChannels The Number of QAM Channels N associated to this entry.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.3.5.1.2`
docsIfMCmtsChannelBlockCfgNumberChannels The Number of QAM Channels N' to configure for the QAM block. The maximum number of channels per block follows the consideration of maximum number of digital channels in a heade…	column	Unsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.3.5.1.3`
docsIfMCmtsChannelBlockMute The Mute control object for the Block Channel A set to this object to 'true' is reflected in ifOperStatus set to 'down' of the QAM channels associated to the block Channel. The …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4491.2.1.6.1.3.5.1.4`
docsIfMCmtsChannelBlockTestIfIndex The ifIndex of the QAM channel to perform the QAM channel test. A Set to a value that does not correspond to a QAM Channel within the Block channel returns error 'wrongValue'. A…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.4491.2.1.6.1.3.5.1.6`