agentTransferUploadFilename

DNOS-SWITCHING-MIB · .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.4
MIB view Table view

Object

scalar r/w OctetString 
Transfer upload tftpfilename configures the file name for the file being
uploaded from the switch. It can be up to 32 alphanumeric characters.
The switch remembers the last file name used.
File path can be appended to the file name if the string is less than 17
characters. Otherwise, the File Path field will need to be used and the
File Name will be appended to the File Path as is. An example would be
File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.
Note: File Name, File Path, and TFTP Server IP Address are applicable
only if the Transfer Mode is TFTP.

Context

MIB
DNOS-SWITCHING-MIB
OID
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.4
Type
scalar
Access
readwrite
Status
current
Parent
agentTransferUploadGroup
Siblings
12

Syntax

OctetString

Values & Constraints

Enumerated Values
1enable
2disable
3delete

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agentTransferUploadMode
Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP, FTP or SCP. X/Y/ZMODEM is valid only when the file trans…
scalarEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.1
agentTransferUploadImagename
Transfer upload image name. Sets the image to be uploaded as the specified name. Imagename cannot be set to unknown(1) option. When no name is set this object returns unknown(1) b…
scalarEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.10
agentTransferUploadUsername
Username applicable only to secure upload types, i.e., SFTP, FTP or SCP.
scalarOctetString.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.11
agentTransferUploadPassword
Password applicable only to secure upload types, i.e. SFTP, FTP or SCP.
scalarOctetString.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.12
agentTransferUploadRemoteFilename
Transfer upload remote filename configures the file name for the file being created remotely. It can be up to 32 alphanumeric characters. Note: File Name, File Path, and Server IP…
scalarOctetString.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.13
agentTransferUploadServerIP deprecated
Transfer upload server ip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The address is 4 intege…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.2
agentTransferUploadPath
Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.
scalarOctetString.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.3
agentTransferUploadDataType
Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Code File - Configuration File - Operational…
scalarEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.5
agentTransferUploadStart
Transfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
scalarEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.6
agentTransferUploadStatus
Indicates the current status of an upload transfer.
scalarEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.7
agentTransferUploadServerAddressType
The type of the tftpserverip address, as defined in the InetAddress MIB. The agentTransferUploadServerAddress object is intepreted within the context of agentTransferUp…
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.8
agentTransferUploadServerAddress
Transfer upload tftpserverip configures the IP address of the server where the file is to be uploaded to.It is valid only when the Transfer Mode is TFTP, SFTP, FTP or SCP. The typ…
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.9