agentSwitchUnicastControlMode
DNOS-SWITCHING-MIB ·
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.8
Object
scalar
r/w
Enumeration
The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
Context
- MIB
- DNOS-SWITCHING-MIB
- OID
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- agentSwitchStormControlGroup
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
3 | not-supported |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentSwitchDot3FlowControlMode Config switchconfig flowcontrol allows you to enable or disable
802.3x flow control for the switch. This value applies to only
full-duplex mode ports. Enabling asymmetric flow con… | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.1 |
| agentSwitchBroadcastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.10 |
| agentSwitchMulticastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.11 |
| agentSwitchUnicastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.12 |
| agentSwitchStormControlType Type of storm control.
broadcast(1) - Broadcast storm control traffic.
multicast(2) - Multicast storm control traffic.
broadcast(3) - Unicast traffic resulted in destination looku… | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.13 |
| agentSwitchStormControlAction Action to be taken when storm control rate limit is reached.
shutdown(1) - Diag disable the interface on storm control.
trap(2) - Generate trap on storm control. | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.14 |
| agentSwitchBroadcastStormControlAction Configures the action to be taken when broadcast storm control rate limit is reached.
none(0) - No action is taken.
shutdown(1) - Diag disable the interface on storm control.
trap… | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.15 |
| agentSwitchMulticastStormControlAction Configures the action to be taken when multicast storm control rate limit is reached.
none(0) - No action is taken.
shutdown(1) - Diag disable the interface on storm control.
trap… | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.16 |
| agentSwitchUnicastStormControlAction Configures the action to be taken when unicast storm control rate limit is reached.
none(0) - No action is taken.
shutdown(1) - Diag disable the interface on storm control.
trap(2… | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.17 |
| agentSwitchBroadcastControlMode The switch config broadcast allows you to enable or disable
broadcast storm recovery mode. When you specify Enable for Broadcast
Storm Recovery and the broadcast traffic on any Et… | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.4 |
| agentSwitchBroadcastControlThreshold Configures the broadcast storm recovery threshold for this port
as a percentage of port speed. | scalar | Unsigned32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.5 |
| agentSwitchMulticastControlMode The switch config multicast allows you to enable or disable
multicast storm recovery mode. When you specify Enable for multicast
Storm Recovery and the multicast traffic on any Et… | scalar | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.6 |
| agentSwitchMulticastControlThreshold Configures the multicast storm recovery threshold for this port
as a percentage of port speed. | scalar | Unsigned32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.7 |
| agentSwitchUnicastControlThreshold Configures the unicast storm recovery threshold for this port
as a percentage of port speed. | scalar | Unsigned32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.9 |