agentPortMulticastControlMode
DNOS-SWITCHING-MIB ·
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.22
Object
column
r/w
Enumeration
If enabled, multicast storm recovery will function on this port. When you specify Enable for Multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
Context
- MIB
- DNOS-SWITCHING-MIB
- OID
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agentPortConfigEntry
- Table
- agentPortConfigTable
- Siblings
- 51
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentPortDot1dBasePort The port number of this port. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.1 |
| agentPortClearStats clear stats for this port only | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.10 |
| agentPortDefaultType This object identifies the default administrative port type,
to be used in conjunction with the operational port type
denoted by agentPortType.
The set of possible … | column | ObjectIdentifier | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.11 |
| agentPortType This object identifies the port type. An initial set of MAU types
are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to
new types of MAUs is managed by the IANA. If … | column | ObjectIdentifier | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.12 |
| agentPortAutoNegAdminStatus obsolete This object identifies the administration status of auto negotiation
for this port. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.13 |
| agentPortDot3FlowControlMode Config flowcontrol allows you to enable or disable
802.3x flow control for this port. This value
applies to only full-duplex mode ports. Enabling
asymmetric flow control allows th… | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.14 |
| agentPortDVlanTagMode Controls the Double Vlan Tag mode on this port. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.15 |
| agentPortDVlanTagEthertype Configures the Double Vlan Tag Ethertype for this port.
If this object is supported, ethertype cannot be configured
globally for the switch.
Commonly used are the E… | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.16 |
| agentPortDVlanTagCustomerId Configures the Customer ID for the Double Vlan Tag for this port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.17 |
| agentPortMaxFrameSizeLimit This object identifies the largest value that can be
configured for agentPortMaxFrameSize | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.18 |
| agentPortMaxFrameSize This object identifies the currently configured maximum frame size
value for this port. The maximmum value that this object can be set
to is the value of agentPortMaxFrameSizeLimi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.19 |
| agentPortIfIndex The switch's Port IfIndex | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.2 |
| agentPortBroadcastControlMode If enabled, broadcast storm recovery will function on this port.
When you specify Enable for Broadcast Storm Recovery and the broadcast
traffic on this Ethernet port exceeds the c… | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.20 |
| agentPortBroadcastControlThreshold Configures the broadcast storm recovery threshold for this port. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.21 |
| agentPortMulticastControlThreshold Configures the multicast storm recovery threshold for this port. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.23 |
| agentPortUnicastControlMode If enabled, unicast storm recovery will function on this port.
When you specify Enable for Unicast Storm Recovery and the unknown unicast
traffic on this Ethernet port exceeds the… | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.24 |
| agentPortUnicastControlThreshold Configures the unicast storm recovery threshold for this port. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.25 |
| agentPortSwitchportMode | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.26 |
| agentPortVoiceVlanMode Describes and Configures the Port Voice VLAN Mode. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.27 |
| agentPortVoiceVlanID Describes and Configures the Port Voice VLAN ID
if the Voice Vlan Mode is Vlan ID. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.28 |
| agentPortVoiceVlanPriority Describes and Configures the Port Voice VLAN Priority
if the Voice Vlan Mode is dot1p. A value of 255 indicates
that the priority is not configured. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.29 |
| agentPortIanaType The switch's Port Type | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.3 |
| agentPortVoiceVlanDataPriorityMode Describes and Configures the Port Voice VLAN Data Priority Mode. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.30 |
| agentPortVoiceVlanOperationalStatus Describes the Port Voice VLAN Operational Status. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.31 |
| agentPortVoiceVlanAuthenticationMode deprecated Describes and Configures the Port Voice VLAN Authentication Mode.
It is enabled by default. To disable, following are the pre-requisites.
Voice Vlan shall be enabled Globally,
Dot… | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.32 |
| agentPortDot3FlowControlOperStatus This object identifies operational status of the flow control per port. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.33 |
| agentPortTransceiverFwPartNumber Firmware part number of 10GBASE-T transceiver.
For other ports, or if module is not inserted,
octet sting will be filled with 0xFF bytes.
See also next field, agentPortTransceiver… | column | OctetString | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.34 |
| agentPortTransceiverFwRevision Firmware revision of 10GBASE-T transceiver.
For other ports, or if module is not inserted,
octet sting will be filled with 0xFF bytes.
See also previous field, PortTransceiverFwPa… | column | OctetString | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.35 |
| agentPortBroadcastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.36 |
| agentPortMulticastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.37 |
| agentPortUnicastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.38 |
| agentPortVoiceVlanUntagged Describes and Configures the Port Voice VLAN tagging mode. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.39 |
| agentPortSTPMode obsolete The switch's Port Spanning Tree Protocol Mode
STP mode values are:
dot1d (the default)
fast, indicates you want to use the fast spanning tree mode
off, indicates th… | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.4 |
| agentPortVoiceVlanNoneMode Describes and Configures the Port Voice VLAN None mode. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.40 |
| agentPortVoiceVlanDSCP Describes and Configures the Port Voice VLAN DSCP value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.41 |
| agentPortVoiceVlanAuthMode Describes and Configures the Port Voice VLAN Authentication mode.
Disable means authentication not required for voice devices when dot1x is enabled. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.42 |
| agentPortAccessVlanID Describes and Configures the VLAN ID of access switch port.
A value of 0 indicates that the switch port is not configured as
access port. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.43 |
| agentPortSpeedDuplexStatus This object is used to set the speed and duplex settings for a port.
If auto-duplex(0) or speed-auto(3) is enabled, then auto-negotiation is
enabled.If auto-duplex(0) is set but s… | column | Bits | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.44 |
| agentPortNativeVlanID Describes and Configures the VLAN ID of Trunk switch port.
Configures the Native VLAN Id for the port. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.46 |
| agentPortDDisableAutorecoveryTime The time in seconds left to port autorecovery from D-Disable state. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.47 |
| agentPortDDisableComponents The list of components put the port to D-Disable state. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.48 |
| agentPortLoadStatsInterval The length of time for which data is used to compute load statistics.
The value is given in seconds, and must be a multiple of 30. The allowable
range is 30 to 600 seconds. | column | Integer32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.49 |
| agentPortSTPState obsolete The switch's Port Spanning Tree Protocol State.
This object is only supported when the Dot1d Protocol is enabled. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.5 |
| agentPortDDisableReason The reason for which the port is set to D-Disable. Here reason is
the enum assigned to the particular component. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.50 |
| agentPortBroadcastControlAction Configures the action to be taken when broadcast storm control rate limit is reached.
none(0) - No action is taken.
shutdown(1) - Diag disable the interface on storm control.
trap… | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.51 |
| agentPortMulticastControlAction Configures the action to be taken when multicast storm control rate limit is reached.
none(0) - No action is taken.
shutdown(1) - Diag disable the interface on storm control.
trap… | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.52 |
| agentPortUnicastControlAction Configures the action to be taken when unicast storm control rate limit is reached.
none(0) - No action is taken.
shutdown(1) - Diag disable the interface on storm control.
trap(2… | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.53 |
| agentPortAdminMode The switch's Port Admin Mode | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.6 |
| agentPortPhysicalMode obsolete The switch's Port Speed Mode. This is the configured physical mode.
This object is read-only for gigabit ports | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.7 |
| agentPortPhysicalStatus obsolete The switch's Port Physical Speed Status. This is the current actual speed. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.8 |
| agentPortLinkTrapMode If enabled, link up and link down traps will be sent for this port. | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.9 |