agentLagSummaryRateLoadInterval

DNOS-SWITCHING-MIB · .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.20
MIB view Table view

Object

column r/w Integer32 
The length of time for which data is used to compute load statistics.
The value is given in seconds, and must be a multiple of 30.  The allowable
range is 30 to 600 seconds.

Context

MIB
DNOS-SWITCHING-MIB
OID
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.20
Type
column
Access
readwrite
Status
current
Parent
agentLagSummaryConfigEntry
Table
agentLagSummaryConfigTable
Siblings
19

Syntax

Integer32

Values & Constraints

Enumerated Values
1enable
2disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agentLagSummaryLagIndex
Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable.
columnInteger32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.1
agentLagSummaryType
Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.10
agentLagSummaryStaticCapability
Agent LAG Static Capability enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.11
agentLagSummaryHashMode
Agent LAG Hash Mode. This configures the hashing-mode for trunk port computation. The following are the possible values for hashing-mode. 1 - Source…
columnInteger32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.12
agentLagSummarySwitchportModecolumnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.13
agentLagSummaryMinimumActiveLinks
Agent LAG Threshold. This configures the threshold(i.e minimum number of active ports) value for trunk port .
columnInteger32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.14
agentLagSummaryAccessVlanID
Describes and Configures the VLAN ID of access switch port. A value of 0 indicates that the switch port is not configured as access port.
columnInteger32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.15
agentLagSummaryNativeVlanID
Describes and Configures the VLAN ID of access switch port. Configures the Native VLAN ID of the port.
columnInteger32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.16
agentLagSummaryLocalPreferenceMode
Agent LAG Local Preference Mode. Enables or disables the LAG interface's Local Preference Mode.
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.17
agentVpcId
To configure the port-channel (LAG) as VPC. 0 - To unconfigure the VPC on the port-channel (or) port-channel is not configured as VPC.
columnUnsigned32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.18
agentLagSummaryPortCounter
LAG port flap counter.
columnInteger32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.19
agentLagSummaryName
Agent LAG Name. The associated name of the LAG used during creation.
columnOctetString.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.2
agentLagSummaryFlushTimer obsolete
Agent LAG FlushTimer.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.3
agentLagSummaryLinkTrap
Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.4
agentLagSummaryAdminMode
Agent LAG AdminMode. Administratively enables or disables this LAG interface.
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.5
agentLagSummaryStpMode
Agent LAG StpMode Administratively enables or disables STP on this interface.
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.6
agentLagSummaryAddPort
Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the po…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.7
agentLagSummaryDeletePort
Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.8
agentLagSummaryStatus
Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.9