dmonPhyChannelInterleave

DMON-PHY-MIB · .1.3.6.1.4.1.5802.999999.1.2.1.15
MIB view Table view

Object

column Enumeration 
The Forward Error Correction (FEC) interleaving used
for this downstream channel.
Values are defined as follows:
taps8Increment16(3):   protection 5.9/4.1 usec,
                       latency .22/.15 msec
taps16Increment8(4):   protection 12/8.2 usec,
                       latency .48/.33 msec
taps32Increment4(5):   protection 24/16 usec,
                       latency .98/.68 msec
taps64Increment2(6):   protection 47/33 usec,
                       latency 2/1.4 msec
taps128Increment1(7):  protection 95/66 usec,
                       latency 4/2.8 msec
taps12increment17(8):  protection 18/14 usec,
                       latency 0.43/0.32 msec
              
The value 'taps12increment17' is supported by EuroDOCSIS
cable systems only, and the others by DOCSIS cable systems.
              
If the interface is down, this object either returns
the configured value (CMTS), the most current value (CM),
or the value of unknown(1).
The value of other(2) is returned if the interleave
is known but not defined in the above list.
See the associated conformance object for write
conditions and limitations.  See the reference for the FEC
configuration described by the setting of this object.

Context

MIB
DMON-PHY-MIB
OID
.1.3.6.1.4.1.5802.999999.1.2.1.15
Type
column
Access
readonly
Status
current
Parent
dmonPhyInfoEntry
Table
dmonPhyInfoTable
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
1unknown
2other
3taps8Increment16
4taps16Increment8
5taps32Increment4
6taps64Increment2
7taps128Increment1
8taps12increment17
9taps128Increment2
10taps128Increment3
11taps128Increment4
12taps128Increment5
13taps128Increment6
14taps128Increment7
15taps128Increment8

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dmonPhyChannelIndex
The downstream channel index starting from 1.
columnInteger32.1.3.6.1.4.1.5802.999999.1.2.1.1
dmonPhyChannelSigQMER
Modulation error ratio of the monitored channel
columndB DOCS-IF-MIBTenthdB.1.3.6.1.4.1.5802.999999.1.2.1.10
dmonPhyChannelSigQPreFECBER
Bit-error-rate of the monitored channel before FEC repair
columntrillionth SNMPv2-SMIInteger32.1.3.6.1.4.1.5802.999999.1.2.1.11
dmonPhyChannelSigQPostFECBER
Bit-error-rate of the monitored channel after FEC repair
columntrillionth SNMPv2-SMIInteger32.1.3.6.1.4.1.5802.999999.1.2.1.12
dmonPhyChannelSigQCER
codeword-error-rate of the monitored channel
columntrillionth SNMPv2-SMIInteger32.1.3.6.1.4.1.5802.999999.1.2.1.13
dmonPhyChannelSigQECR
codeword error-corrected-rate of the monitored channel
columntrillionth SNMPv2-SMIInteger32.1.3.6.1.4.1.5802.999999.1.2.1.14
dmonPhyChannelSigQEqualizationData
This object returns the equalization data for the downstream channel.
columnDOCS-IF-MIBDocsEqualizerData.1.3.6.1.4.1.5802.999999.1.2.1.16
dmonPhyChannelSigScanId
Id generated by the dmon to identify a set of data. This Id will be send in the scan finish message. It will help the CPS to identify the data set.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.5802.999999.1.2.1.17
dmonPhyChannelPowerMin
The min value of the received power level of the channel during the dwelling time.
columndBmV DOCS-IF-MIBTenthdBmV.1.3.6.1.4.1.5802.999999.1.2.1.18
dmonPhyChannelPowerMax
The max value of the received power level of the channel during the dwelling time.
columndBmV DOCS-IF-MIBTenthdBmV.1.3.6.1.4.1.5802.999999.1.2.1.19
dmonPhyChannelLockedtime
The date and time of the reading
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.5802.999999.1.2.1.2
dmonPhyChannelSigQMERMin
The min value of the modulation error ratio of the monitored channel during the dwelling time.
columndB DOCS-IF-MIBTenthdB.1.3.6.1.4.1.5802.999999.1.2.1.20
dmonPhyChannelSigQMERMax
The max value of the modulation error ratio of the monitored channel during the dwelling time.
columndB DOCS-IF-MIBTenthdB.1.3.6.1.4.1.5802.999999.1.2.1.21
dmonPhyChannelScanMode
The value of this object indicates the result of the measurement is from.
columnEnumeration.1.3.6.1.4.1.5802.999999.1.2.1.22
dmonPhyChannelQAMlocked
Indicates whether QAM is locked. If not locked, Most of the columns in this entry are not valid.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5802.999999.1.2.1.23
dmonPhyChannelFEClocked
Indicates whether FEC is locked. If not locked, post FEC values in this entry are not valid.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5802.999999.1.2.1.24
dmonPhyChannelFrequency
The center of the downstream frequency associated with this channel. This object will return the current tuner frequency.
columnhertz Integer32.1.3.6.1.4.1.5802.999999.1.2.1.3
dmonPhyChannelModulation
The modulation type associated with this downstream channel. If the interface is down, this object either returns the most current value, or the value of unknown(1).
columnDMON-MIBModulationType.1.3.6.1.4.1.5802.999999.1.2.1.4
dmonPhyChannelPower
The received power level of the channel. If the interface is down, this object either returns the most current value or the value of 0. See the reference for recommended and requ…
columndBmV DOCS-IF-MIBTenthdBmV.1.3.6.1.4.1.5802.999999.1.2.1.5
dmonPhyChannelAnnex
The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-T J.83 is used. (equivalent to E…
columnEnumeration.1.3.6.1.4.1.5802.999999.1.2.1.6
dmonPhyChannelSigQUnerroreds
Codewords received on this channel without error.
columncodewords SNMPv2-SMICounter32.1.3.6.1.4.1.5802.999999.1.2.1.7
dmonPhyChannelSigQCorrecteds
Codewords received on this channel with correctable errors.
columncodewords SNMPv2-SMICounter32.1.3.6.1.4.1.5802.999999.1.2.1.8
dmonPhyChannelSigQUncorrectables
Codewords received on this channel with uncorrectable errors.
columncodewords SNMPv2-SMICounter32.1.3.6.1.4.1.5802.999999.1.2.1.9